BLOCK PAGE!!!
Get Full Details

Privately Funded

Bidding Soon

Documents Available

Publicly Funded

Addenda Available

Post-Bid

Published August 7, 2024 at 8:00 PM

Updated August 15, 2024

Site work and paving for a mixed-use development in Duboistown, Pennsylvania. Completed plans call for site work for a road / highway; for paving for a road / highway; and sidewalk / parking lot.

Roadway Paving Contract: Perform approximately 1,645 SY of roadway surface milling; Furnish and place approximately 160 Tons 9.5 mm asphalt; Install 3 Each of ADA curb ramps; Removal 1 Each curb ramp; Perform approximately 37 CY roadway widening; Perform approximately 10 Ton of roadway base repair. Milling of Asphalt Surface 1.5-inch Depth: Provide a milling machine designed and built for milling existing Asphalt roadway pavement with a grade and slope control system. Mill the Asphalt surface to a uniform surface 1.5-inch depth as required, for the full width of the roadway. Milled material to be removed and stockpiled or disposed of as directed by the Duboistown Borough Official. Milling should provide a properly cross-sloped surface to maintain drainage throughout construction. Mill the roadway area to provide a finished surface that is free from gouges, grooves, and ridges. Immediately after milling, remove milled material. Carefully remove the existing Asphalt material around utility facilities within work areas. Repair or replace utility facilities that are damaged by the milling operation to the satisfaction of the utility owner. Control the rate of milling to avoid tearing of the mat, which causes chunky and non-uniformly milled material. If directed, separate oversized and chunky milled material. Maintain the milled pavement surface free of all loose materials and dust General Milling Note: o Milling heads mounted to roadway equipment will not be accepted for milling roadway surface. This includes but not limited to milling head mounted onto skid steers, loaders and backhoes. Asphalt Wearing Course 9.5mm: Superpave Asphalt Mixture Design, Wearing Course, PG 64S-22, < 0.3 Million ESALS, 9.5 MM Mix, SRL-Any Furnish and place Asphalt Wearing Course material at 1- 1/2 " compacted depth across entire cross-section of roadway where indicated. General Paving Note: o Contractor shall contact Duboistown Borough 2 weeks prior to start of work. Performance bond and payment bond in the amount of 100% of the contract, as well as proof of worker's compensation insurance will be required from the lowest responsible bidder for each contract. The Municipality reserves the right to reject any or all proposals.

Post-Bid

Roads / Highways

$400,000.00

Public - City

Paving, Site Work

Documents for this project are exclusively Specifications. If Plans become available, we will add them here.

3

Subscribe For Documents

1 Record(s)

Subscribe for All Details

Trades Specified

Division 00 - Lorem Ipsum

Division 00 - Lorem Ipsum

Lorem, Ipsum, Dolor, Sit amet

Find More Local Projects

Within 75 Miles of This Project
195
Active Projects
95
Bidding Soon
1,334
All Active Projects
0
Updated Recently

You’ve Reached the Free View Limit

Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.

Come back in [[refresh_days]] to get [[project_count]] more free projects.

August 14, 2024

September 13, 2024

Project location map

Multiple Locations, Duboistown, PA

Related To This Project


Recently Viewed

Fuel growth with access to the bidding project info your business needs.

Full details, including key contact information, important dates, plans and specifications, on over 500,000 Projects including 5000 updated daily available to subscribers.