Renovation of a military facility in Washington Na, District of Columbia. Completed plans call for the renovation of a military facility.

Fiber installation and electrical relocation in suites 5500 and 4102. Contractor shall submit Updated Design Drawings - Any drawings submitted during the performance of this contract shall be prepared using AutoCAD Version 2012 or higher. AutoCAD floor plan backgrounds will be provided. Drawings shall be protected from duplication and distribution as specified above. Contractor shall submit As-Built Drawings - Prior to closeout, provide as-built record drawings showing installed conditions including wire/cable routes and all concealed items such as junction boxes. Drawings shall be prepared using AutoCAD Version 2012 or higher. Drawings shall be protected from duplication and distribution per SSP Security requirements. Place of Performance: All subcontractor personnel shall be located at SSPHQ on the Washington Navy Yard in Washington, DC. Description ofWork Overview Suite 5500. Currently work area outlet faceplatesreceive four unclassified RJ45Cat 5E cables and one 2-strand classified OM1 cable. This work order in suite 5500 to accommodate additional desk/printer stations and requires that each work area outlet consist of twoRJ45Cat 5E cables and two 2-strand classified OM3 cables. Contractorwill remove all existing OM1 horizontal fiber that goesfrom TC51 to the areas being renovated. Note:There is OM1 fiber coming into TC51 that does not terminate in the renovation zone - this fiber must remain intact and terminated to the patch panel in the existing rack (Rack2). Reuse and redistribute Cat 5E cable in suite 5500 to two cables perwork area outlet to allow for existing cabling to accommodate the added work area outlets. There will be a total of three work stations, one office and two printer stations