Site work for a swimming pool in Oregon City, Oregon. Working plans call for site work for a swimming pool.

Refinishing the pool shell surface. Shell dimensions approximately 83' feet long, 42' wide, with a depth sloping from 4' to 12'. Verify all dimensions in field. Supply/Install protective material around work area. Limit impact only to pool deck area. Protect office space and HVAC from construction. Sweep, vacuum, pressure wash pool surface. Remove all existing paint via Hydro blasting. Install Commercial quartz- white plaster finish at a final finish depth of 3/8". Install new main drain grate; Neptune Benson VGBA 2017 or equal. Supply/Install new in-wall steps. Install new inlet fittings to match existing pool layout and quantity, adjust to new plaster surface depth. Supply/Install black tiled racing lanes (qty 6) - 2" x 2" tiles that are 12" wide. Supply/Install black tiled transition slope (qty 1) - 2" x 2" tiles that are 12" wide (width of pool and up wall). Supply/Install black tiled water polo lines (qty 2) - 2' x 2" that are 4" wide (width of pool and up wall). Waterproof gutter prior to new tile installation. Supply/install white gutter tile - 2" x 2" tiles (back gutter wall, bottom of gutter, outside and inside of gutter lip). Supply/install white gutter tile (top of gutter lip) - 1 x 2" or; alternate install of 264 Linear Feet of 16 gauge 316 2B stainless steel cover. Include welded joints and mitered corners. Include slip joints for expansion at 10 locations. Supply/Install standard white sanded grout. Install 2 new stainless-steel eyebolts for attaching lane ropes. Match existing, final location to be supplied by owner. 1 Year warranty for plaster and tile install - materials & workmanship by installer. All bids submitted on <12/03/2024> have been Rejected.”