Demolition, site work, remodeling and addition to a municipal facility in Ada, Oklahoma. Completed plans call for the addition of a municipal facility; for the demolition of a municipal facility; for the remodel of a municipal facility; and for site work for a municipal facility.

conference room addition and partial remodel project for the Pontotoc County Specialty Courts Office This work will be performed according to the project specification provided for t his project. The proposal will include a special provision concerning the Contractor's Non Collusion Affidavit and a 5% bid bond in a certified or cashier's check or surety bond shall accompany the sealed proposal of each bid- der. Evidence of having proper worker's compensation coverage for employees as provided by Title 85 of the Oklahoma Statutes Section 61, a warranty bond, and a per-formance bond shall be required before issuance of a work order. Pontotoc County reserves the right to reject any or all bids. Remodel portion: Demo and Remove one Office Wall (TBD) o Cut In a new window on North Wall o Close in one office door (TBD) o Complete all drywall work and painting as needed o Demo and remove VCT tile as needed o Install carpet squares in two offices and a hallway o Complete trim and cove base in affected areas Conference Room Addition (301 X18' conference room and 1Q<< X181 file room) Complete layout for new 40'X18' addition o Relocate existing HVAC units to the south side of the building (All HVAC units to be moved to the East side of the new addition) (will be moved twice) o Remove fencing on the south side o Remove existing deck o Complete dirt work and rough in all plumbing and electric as needed o Complete concrete slab o Complete framing of all walls, roof, and vaulted ceilings (Remove brick on the east wall only as needed to allow forframingtie in) (existing brick wall will be the finished interior wall of conference room) Complete install of all windows, doors, and dry-in structure Complete all exterior brick soffit fascia and roofing to match existing structure Rough in plumbing, electric, and HVAC (To be done per code) (2-ton HVAC unit) (floor outlet in middle of conference room) Insulate walls and ceiling Complete all dry wall, mud work, and light skip trowel texture Complete all painting (Color(s) TBD) Install flooring (TBD) Complete all trim out of doors and windows Install cabinetry and countertops for conference room coffee bar Complete all electrical top out and set fixtures (recessed LED) Complete plumbing and set fixtures for coffee bar sink Complete install of HVAC unit. Placement of Inside unit TBD o Complete all final interior and exterior finishes and touch ups PArking-Complete concrete and striping for 2 parking spots (with parking blocks) and a walk way to side door (will be placed on the south side of new addition)