This is a service / maintenance or supply contract in Dixon, Illinois. Contact the soliciting agency for additional information.

This project requires 26% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. The Complexity Factor for this project is 0. The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on January 23, 2025, at 9:00 AM at the Region Two/District Three Office in Ottawa. Phase III engineering services are required for the inspection, supervision, construction layout, field material testing (all field material testing will be completed with IDOT equipment) and field inspection for roadway rehabilitation throughout District Three. The various types of jobs are anticipated to consist of route and seal, patching, traffic signals, landscaping, milling and resurfacing, bridge repair and replacement, concrete pavement, and pavement marking. The Consultant will be asked to furnish two (2) to four (4) Resident Engineers/Technicians and four (4) to ten (10) inspectors on various projects. The Consultant is expected to perform onsite inspection, engineering layout, and verification of contractor staking, maintain documentation, submit pay estimates, change orders, and any other duties required to complete these projects on a timely basis and in accordance with the State Specifications and guidelines. The inspectors should be knowledgeable in the use of the departments documentation tracking system Construction & Materials Management System (CMMS). The completion date for this contract will be 60 months after authorization to proceed. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The Prime firm must be prequalified in the Special Services (Construction Inspection) category to be considered for this project. Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS). The method of contractor selection has not been determined at this time. IDOT - 26 - RFQ - Various, Phase III Construction Inspection Projects, Various Routes, Various Counties, Region Two/District Three