Renovation of a municipal facility in Canton, Michigan. Completed plans call for the renovation of a municipal facility.

The project includes removal and replacement of Roof Top Unit #7 & #8 located at 1150 Canton Center Road, Canton MI 48187. Project location 1150 Canton Center, Canton MI 48188 Any questions contact Tom Gaffka at Tom.Gaffka@cantonmi.gov SPECIFICATION All bids to include electrical disconnect and complete removal from site of RTU's Furnish and install new RTU(s) at Canton Admin building RTU's current make and model RTU 7 Model: Heatex E-CAHU-1D-27875-AC/VS-1-A RTU 8 Model: Heatex E-CAHU-1D-23555-AC/VS-1-A New Units RTU 7: ICEW model AH320-DX98 RTU 8: ICEW model AH240-DX81 MERV 8 or greater *Pleated (standard off the line may not be pleated, they will need to be replaced). RTU start up to be completed the same day as installation date by certified manufacture team. Owner training by certified manufacture team. Reconnect all exiting power, start up and test Include all equipment and rentals, cranes and hoisting No curb on curb insulation permitted Proposal should include all permits and licenses Must include in bid controls Knight Watch contact - Matt Tomes to provide all RTU control cost (contact info below) Labor to be broken out from materials The Contractor shall schedule work to cause the least amount of conflict with normal activities in the area. Contractor to be responsible for all demolition and disposal costs. Contractor must provide all necessary means of safety precautions, including barriers, signage, etc., and must communicate with the Township project manager aminimum of 48 hours prior to construction. All schedules must be approved by the Township Project Manager. Any deviation from these specifications must be approved in writing by Canton Township. Permits must be pulled and approved prior to work taking place. The Contractor must be fully licensed to perform the work. 1-year parts and labor warranty 5-year parts only compressors warranty