Site work for a water / sewer project in Eagle Butte, South Dakota. Completed plans call for site work for a water / sewer project.

Approximately 83,810 linear feet of 16" diameter buried ductile iron or PVC pipe. If PVC or ductile iron pipe is selected, only one material type will be allowed for that portion of the project. Approximately 27,904 linear feet of 16" diameter buried ductile iron or steel pipe. If steel or ductile iron pipe is selected, only one material type will be allowed for that portion of the project. Approximately 13,487 linear feet of 6" diameter buried ductile iron or PVC pipe. If PVC or ductile iron pipe is selected, only one material type will be allowed for that portion of the project. Approximately 445 linear feet of 6" diameter buried ductile iron or steel pipe. If steel or ductile iron pipe is selected, only one material type will be allowed for that portion of the project. Approximately 1,518 linear feet of 4" diameter buried ductile iron or PVC pipe. If PVC or ductile iron pipe is selected, only one material type will be allowed for that portion of the project. Approximately 22 linear feet of 4" diameter buried ductile iron or steel pipe. If steel or ductile iron pipe is selected, only one material type will be allowed for that portion of the project. Approximately 50 linear feet of 3" diameter buried PVC pipe; Approximately 9,911 linear feet of 2" diameter buried PVC service pipe; Approximately 150 linear feet of 30" diameter jacked or bored highway crossing steel casing pipe; Approximately 170 linear feet of 12" diameter horizonal direction drilled PVC encasement pipe; Approximately 210 linear feet of 10" diameter horizonal direction drilled PVC encasement pipe; Approximately 990 linear feet of 6" diameter horizonal direction drilled PVC encasement pipe; Miscellaneous appurtenances including isolation gate valves, combination air valves (including concrete vaults), pressure reducing stations (including steel vaults), direct bury gate valves, blow-off assemblies, service taps, curb stops, and meter pits; Temporary and permanent erosion control, fencing, reclamation and seeding; Corrosion protection system components including joint bonding, tracer wires and tracer wire access boxes, galvanic anodes, test stations, coating and linings, and cathodic protection systems; Traffic control and haul road maintenance during construction; Pipeline cleaning, hydrostatic pressure testing, flushing, disinfection and commissioning; and Clean up and all other miscellaneous work required, not herein mentioned, but inferred from the construction Contract Documents.