Renovation of an educational facility in Fresno, California. Completed plans call for the renovation of a educational facility.

License Requirements C-10 or C-7 Liquidated Damages $1500/Day Estimated Bid Value Under CUPCCAA Bid Limits Start/Delivery Date Start on or about May 28, 2025- Complete on or before July 22, 2025 Project Duration 55 days Bid Bond 10.00% Payment Bond 100.00% Performance Bond 100.00% The scope of work includes providing all necessary labor, equipment, materials, and related items required to complete the final phase (Phase 2) of a two-phase data refresh program. This phase focuses on cabling upgrades for the building. In this phase, the contractor will: Re-terminate and Re-identify Cabling: Re-terminate and re-identify all remote-side ("end2," opposite the TR) existing Cat6 cabling, and install it onto new Cat6 jacks, faceplates, and related accessories provided by the contractor to complete the re-termination process. Remote-Side Labeling: Provide and install new remote-side labeling. Certification Testing: Perform TIA Standards-based Cat6 certification testing on all cables. Raceway Cleaning: Clean all existing and new raceways in accordance with the "Raceway Cleaning Requirements." Additionally, the Owner has coordinated with a third-party furniture moving contractor to relocate any furniture obstructing access to raceways or drops. The furniture will be returned to its original position once the contract work is complete and the cabling has been fully certified. Finally, the contractor will re-terminate all Student Services SMF (Single-Mode Fiber) on LC/APC connectors, following the Method A/B polarity scheme as specified in the attached minimum requirements. The District will only consider bids that have been transmitted successfully and have been issued an ebid confirmation number (VBID) with a timestamp from the bid management system. Transmission of bids by any other means will not be accepted. Failure of Bidder to submit an electronic bid shall be the bidder's sole risk and no relief will be granted. Bids must be complete and responsive to all portions of the Contract Documents. Bids must be submitted on the District's Bid Forms. The District does not assume any liability or responsibility based on any defective or incomplete copying, excerpting, scanning, faxing, downloading, or printing of the Bid Documents. The scope of work includes providing all necessary labor, equipment, materials, and related items required to complete the final phase (Phase 2) of a two-phase data refresh program. This phase focuses on cabling upgrades for the building. In this phase, the contractor will: 1. Re-terminate and Re-identify Cabling: Re-terminate and re-identify all remote-side ("end2," opposite the TR) existing Cat6 cabling, and install it onto new Cat6 jacks, faceplates, and related accessories provided by the contractor to complete the re-termination process. 2. Remote-Side Labeling: Provide and install new remote-side labeling. 3. Certification Testing: Perform TIA Standards-based Cat6 certification testing on all cables. 4. Raceway Cleaning: Clean all existing and new raceways in accordance with the "Raceway Cleaning Requirements." All communications with, or questions to, District in any way concerning the Project, Contract Documents, or Bid, must be in writing and submitted via e-mail to Teresa Campagna Bryant, District Director, Procurement and Contracts at teresa.campagna@scccd.edu, and Sofia McClellan, Senior Buyer, at sofia.mcclellan@scccd.edu. Question Deadline 04/01/2025 at 2:00 PM PT