Renovation of a medical facility in Corinth, New York. Completed plans call for the renovation of a medical facility.

To be considered for this project, all quotes must be submitted on the Official Bid Form provided and include the materials and labor cost break down. Vendors / sub-contractors must be registered with NYS DOL in order to submit a quote. A copy of the certificate must be sent to us with your quote (see guidelines in the documents tab.) Work is to be completed within 90 days of award, unless modified below. SCOPE OF WORK includes, but is not necessarily limited to the following: Interior: ? Contractors will be required to work around the needs of the individuals and staff in the homes. ? All paint used in the project must be standard colors or finishes available from Passonno Paint color pattern. Any other paint brands must be approved by the Plant Superintendent and purchasing department. Facility: Capital District DDSO Facility Address: 200 Smith Drive Corinth, NY 12822 Point of Contact: Brooklyn.CMM.Bids@opwdd.ny.gov Contact Phone Number: 718-264-3914/3915/3918 Project Title: House Painting Summary of Work: Interior and Exterior Painting Page 2 of 7 ? Provide finish coats that are compatible with primers used. ? Where a previously painted item or surface is not specifically mentioned, Passonno Paint white semi- gloss enamel paint is to be applied. ? The entire interior of the house is to be painted. If applicable, all doors, door trim, windows, window trim, crown, baseboard, and chair moldings, walls, ceilings, garage (if sheet rocked), basement (if sheet rocked), stairs (including basement stairs, if painted), etc. will be painted. ? Spread drop cloths over floors and room furnishings, and covers surfaces, such as baseboards, doorframes, and windows with masking tape and paper to protect surfaces during painting. ? Remove fixtures, such as pictures, electric switch covers, receptacle covers, etc. from walls prior to painting. ? Remove old paint from surfaces, using a scraper, sandpaper, or a wire brush to prepare surfaces for painting. Smooth surfaces, using sandpaper, brushes, or steel wool. ? All nail holes, cracks, open joints, splits, etc., are to be filled or caulked, using the appropriate material or caulk. Any hole requiring sheetrock for patching will need to be reported to the facility for the repair. Taping and painting will be the responsibility of the vendor doing the painting. ? Do not paint over dirt, rust, scale, grease, moisture, scuffed surfaces, or conditions detrimental to formation of a durable paint film. ? Paint surfaces using brushes or paint rollers. ? Paint exposed surfaces with colors that are designated in the floor plan schedules attached except, where a surface or material is specifically indicated not to be painted or is to remain natural. ? Painting is not required on prefinished items, Vinyl, brick, concrete, aluminum flashing surfaces, concealed surfaces, operating parts, equipment ID tags or labels, or Trex composite decking. ? Apply paint according to manufacturer’s directions. Use applications and techniques best suited for substrate and type of material being applied. ? Apply coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interior or exterior surfaces, trimmings, and fixtures of buildings and other structures. (Use water base to minimize the odor.) All products must have a low VOC rating.