Renovation of a transportation facility in Morrisville, North Carolina. Completed plans call for the renovation of a transportation facility.

The Raleigh-Durham Airport Authority (RDUAA) seeks a qualified contractor to remove and replace a set of double doors located at the loading dock of Terminal 2, 2600 John Brantley Boulevard, Morrisville, NC. The contractor shall furnish all materials, tools, equipment, and labor necessary to complete the removal of the existing double doors and the installation of new double doors with specified hardware. Questions concerning the RFQ requirements must be submitted in writing via email no later than Tuesday, June 5 202 5 at 2:00pm. They must be e-mailed to jordan.hales@rdu.com. 1. Removal and Installation: o Remove the existing double doors at the Terminal 2 loading dock. o Install new double doors and associated hardware as specified below. o Ensure proper alignment, functionality, and compliance with applicable building codes and standards. 2. Work Schedule: o All work shall be performed between 7:00 A.M. and 4:00 P.M., Monday through Friday. o Coordinate scheduling with the RDUAA Facilities Maintenance Department Planner to minimize disruption to airport operations. 3. Contractor Responsibilities: o Provide all materials, tools, equipment, and labor required for the project. o Dispose of old doors and debris in accordance with local regulations. o Ensure the work area is safe, clean, and accessible during and after project completion. Equipment and Materials The contractor shall supply and install the following components: - Doors: o (1) 1-3/4" HM 707T 16 RK F STY RHR (CL; DP25HR; EPT; G12A; G19 CH) o (1) 1-3/4" HM 707T 16 RK F STY LHR (CL; DP25HR; EPT; G12A; G19 CH) - Hinges: o (2) Continuous Hinge 224HD 95" EPT LH 628 - Exit Devices: o (1) Exit Device QEL RX 9847L x 996L-R&V RHR US26D o (1) Exit Device QEL RX 9847L x 996L-R&V LHR US26D - Closers: o (1) Closer 4111 SCUSH TBSRT LH AL o (1) Closer 4111 SCUSH TBSRT RH AL - Electric Power Transfers: o (2) Electric Power Transfer EPT 10 SP28 -Switches: o (2) Switch 679-05HM - Protection Plates: o (2) Protection Plate 8400 34" x 34" US32D - Weatherproofing: o (1) Gasketing 700 N (1 x 72", 2 x 96") SMS-TEKS 6 x 3/4" o (2) Weatherstrip 18061 CNB 96" TKSP8 o (2) Door Bottom 315 CN 36''