Site work for a water / sewer project in Wolf Point, Montana. Completed plans call for site work for a water / sewer project.

Schedule One consists of the restoration of approximately 7,960 linear feet of 8-inch sewer main using cured-in-place-pipe (CIPP) with spot repairs using open cut replacement. Approximately 2,000 linear feet of pipe will be restored by complete replacement of 8-inch PVC sewer main. This schedule also includes the installation of 25 new manholes, lining 3 existing manholes and reinstating active sewer services. Schedule Two consists of the restoration of approximately 4,400 linear feet of 8-inch sewer main with cured-in-place-pipe (CIPP) with spot repairs using open cut replacement. This schedule also includes the installation of 10 new manholes and reinstating active sewer services. Schedule Three consists of the restoration of approximately 3,900 linear feet of 8-inch, 12-inch, and 15-inch sewer mains with cured-in-place-pipe (CIPP) with spot repairs using open cut replacement. Approximately 2,600 linear feet of pipe will be restored by complete replacement of 8-inch PVC sewer main. This schedule also includes the installation of 16 new manholes and reinstating active sewer services. Schedule Four consists of restoration of approximately 1,350 linear feet of 10-inch and 12-inch sewer mains using open cut replacement of 10-inch and 12-inch PVC sewer main. This schedule also includes the installation of 10 new manholes and reinstating active sewer services. Additive Alternate One consists of the restoration of approximately 620 linear feet of 8-inch sewer main with cured-in-place-pipe (CIPP) with spot repairs using open cut replacement. This schedule also includes the installation of 1 new manhole and reinstating active sewer services. Question Deadline Jul 03, 2025 at 5:00 PM Written comments may be submitted to Greg Lukasik of Great West Engineering by mail at: 6780 Trade Center Avenue, Billings, MT 59101 or email at: glukasik@greatwesteng.com. Interpretations or clarifications considered necessary by Engineer in response to such questions will be issued by Addenda delivered to all parties recorded as having received the Bidding Documents. Only questions answered by Addenda will be binding. Doc Note : Bidders will be charged a fee of $42.00 to submit a bid electronically. Paper copies of the contract documents, consisting of half size Drawings and Project Manual, may be examined or obtained at the office of located at 2501 Belt View Drive, Helena, MT 59601, phone 406-449-8627 in accordance with Article 2.1 of Instructions to Bidders. There is a required fee of $160 per set, which is not refundable.