Site work and paving for a road / highway in Universal City, Texas. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The scope of work includes reconstructing approximately 4074 SY of asphalt pavement including 1537 LF of curbs, 620 SY of driveway aprons and Installing 1 curb inlet, 203 LF of 18" HDPE drainpipe tie into existing junction box. Contractor shall use subcontractors for no more than 50% of the Contract Work. The Notice to Proceed will be issued at a Pre-Construction meeting with the selected contractor within 1 week after the bid is awarded. Contractor will have 21 days to begin work from the Notice to Proceed, with 100 days for Substantial Completion and 15 additional days for Final Completion. Each bid must be accompanied by an acceptable bid bond or certified check in the amount of 5% of the total bid. Bids must be submitted on the bid form furnished. No bid may be withdrawn for 45 days after the above scheduled closing time set for the receipt of bids. The City of Universal City reserves the right to reject any and all bids, to waive any formalities, and to select the bid deemed in the best interest of the City. Question Deadline 07/08/2025 at 12:00 PM CT Written questions may be submitted on online. All questions about the meaning or intent of the Contract Documents are to be directed to Engineer. Interpretations or clarifications considered necessary by Engineer in response to such questions will be issued by Addenda mailed or delivered to all parties recorded by Engineer as having received the Bidding Documents. Questions received less than three days prior to the date for opening of Bids may not be answered. Only questions answered by formal written Addenda will be binding. Oral and other interpretations or clarifications will be without legal effect. Install 5' curb inlet and 203 LF of 18" HDPE in drainage easement under enterprise gas main into existing 6x6 junction box Bidder asked what kind of fence they would be placing to replace the fencing in the easement. Chris Martinez responded to match the existing fence type. b. Excavate approx. 2047 CY of existing roadway. c. Remove approx. 1537 LF of cone, header curb, 56 SY of cone, sidewalk & 443 SY of cone driveway apron. d. Install 1479 LF of cone, curb & gutter, 622 SY of cone, driveway apron, 56 SY of cone, sidewalk. a. Lime stabilized subgrade, place geogrid on top, install 6" crushed moisture conditioned base, prime coat, install 4" asphalt treated base & pave 3336 SY of 2" type "D" Virgin mix. e. Place topsoil and sod.