Renovation of a residential development in Levelland, Texas. Completed plans call for the renovation of a residential development.

single construction contract for the roof and fascia replacement project including demolition and all work specified *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. A. The work described in this Section, and on the Drawings indicates in general the demolition work to be done at the sites. C. The Contractor shall take all necessary precautions to protect all trees and plantings on-site that are not scheduled for removal. Erect all necessary barricades to provide the required protection. B. All work requiring demolition or removal, whether described on the Drawings and/or in the Specifications, shall be removed from the sites to the extent required to provide suitable conditions for the application of new materials. Definition: Rough carpentry includes carpentry work not specified as part of other sections and which is generally not exposed, except as otherwise indicated. Types of work in this section include rough carpentry for: 1. wood framing 2. wood nailers and blocking 3. sheathing Include all material, labor and equipment and all related services required for the roofing work as indicated on the drawings and specified herein. 1. The work consists of the removal of all existing composition shingles (multiple layers), all existing drip edges, all existing underlayment, all existing damaged or otherwise unsound decking, all existing flue caps, all existing flashings, all existing flue base flashings, all existing storm collars, all existing plumbing vent flashings, all existing electrical service mast base flashings, all existing turbine vents and bases, and all existing sheet metals. 2. The work consists of the installation of all new composition shingles, new drip edges, new underlayment, new decking (replacing only that which was removed), new flashings, new flue caps, new flue base flashings, new valley flashing, new caps at all flues, new storm collars, new plumbing vent flashings, new electrical service mast base flashings, new caps at all range space exhaust hood flues, new caps at all bath exhaust flues, new turbine vents and bases, and new sheet metals. A. All material, labor, and equipment necessary to fabricate, furnish and install all metal roofing. B. All accessories required for a complete roofing installation. C. Flue caps for water heaters and furnaces shall meet U.L. and A.G.A. requirements. D. Include all permits, fees, tests, etc., as required shall be submitted and paid for by the Contractor. Request for Information Due Date: Thursday, July 24th, 2025, at 12:00 PM Requests for Information (RFI) must be submitted in writing by the General Contractor, via email, to the Architect at candicep@qarch.com and nancyn@qarch.com, matthewf@qarch.com