Renovation of a service station / car wash facility in Aurora, Colorado. Completed plans call for the renovation of a service station / car wash facility.

**As of November 19th, 2025, this project has not yet been awarded. A timeline for the award has not yet been established.** Reference Number 0000399642 City of Aurora Public Safety Training Center (CAPSTC) will have the existing Plymovent diesel exhaust removal system removed in its entirety from the three existing truck bays. This will include but is not limited to the track, hose drop, duct work, and exhaust fan and associated components. The contractor will install the new Nederman diesel exhaust removal system. The new system will run the entire length of the 2nd and 3rd truck bays and a portion of the 1st bay The contractor will install new duct work, a new exhaust fan, and provide revised electrical connections to the new system. There will be 3rd-party commissioning coordination with NORESCO to ensure the system is correctly installed, fully functional and meets the performance of the design documents. The Work of Project is defined by the Contract Documents and consists of the following: The Work of Project is defined by the Contract Documents and consists of the following: 1. Complete removal of the existing vehicle exhaust system including all appurtenances. 2. Installation of a new vehicular exhaust system. Installation of the Nederman system and all components to be completed by LONG Building Technologies (LONG), electrical scope is excluded from the LONG installation and shall be done by a licensed electrical contractor. 3. Repair and patch of existing wall openings. 4. Installation/cutting of new wall openings. 5. Installation of equipment supports 6. Installation of Vehicle exhaust rails, exhaust collection ductwork, and vehicle exhaust fan. (scope by LONG) 7. Installation of electrical circuiting. 8. Installation of system controls. 9. Auxiliary support (i.e. metal panel, CMU, paint, etc). 10. Installation of CO/NO2 sensors and integration with Nederman control panel. Question Deadline 10/02/2025 at 3:00 PM MT Questions are submitted online No, Bidders may make written inquiries concerning this RFP to obtain clarification of requirements. Written inquiries shall be emailed to: Cyndi Winner, Procurement Agent, at cwinner@auroragov.org Buyer Preferences, Guidelines & Requirements General Requirements - Insurance Required Bonding Requirements - Bid Bond 5 % - Performance Bond 100 % - Payment Bond 100 % The Contract Documents require that all work be completed by December 31, 2025, after issuance of notice to proceed. Failure to complete the work as prescribed shall be considered as a Breach of Contract and subject to Liquidated Damages which are $250.00 per day. The estimated cost for this project ranges from $150,000.00 to $175,000.00. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The City of Aurora reserves the right to reject any and all Bids, to waive informalities and irregularities, and to accept that bid which is considered to be in the best interest of the City.