Renovation of an educational facility in New Castle, Pennsylvania. Completed plans call for the renovation of a educational facility.

The Board reserves the right to accept or reject any or all bids. he contractor shal be responsible to comply with policies of Union Area School District and Pennsylvania School Code. Hobart Model CL44-BAS Dishmachine Bid Specs 1. Machine Specifications: _ Machine direction of operation to be Right-to-Left _ Machine electrical voltage to be 208/60/3ph single point electrical connection. 5 _ Standard chamber opening dimensions: 22" x 19 11/16" to accommodate up to six 18" x 26" sheet pans in one rack. (Optional higher than standard chamber opening of 22" x 24") _ The machine MUST be Energy Star rated. _ Final rinse rate: 90 gallons per hour (GPH). _ The machine should have a minimum capacity of 202 racks per hour. 2. Standard Features: _ Machine to be furnished with Complete Delime_ with Delime Notification, Auto Dispensing and Booster Guard_; which notifies the operator when to delime, then automatically doses delime chemical and delimes the machine, including the energy recovery coil and booster heater. _ Control activated NSF certified Pot & Pan mode. _ Capless wash arms for easy cleaning. _ Hobart Service diagnostic connection for fast trouble shooting. _ Configurable Energy saver mode. _ Full touch display to provide simple and intuitive operation for easy training, with integrated diagnostics and troubleshooting to minimize downtime. _ Wi-fi connection with Hobart SmartConnect app provides machine status, temperature logs, error code with trouble shooting, energy cost, consumption, and usage analysis. 3. Tank Heat & Booster Heater: Machine to include 15 kW electric immersion heater controlled by solid-state thermostat with positive low water protection. _ Internal, atmospheric stainless steel, pre-wired and pre-plumbed 18kW booster heater for 110-degree incoming water. (field convertible to 12kW for 140-degree incoming water) 4. Other Features: _ Equipped with anti-jam protection, including an electronic sensor to monitor the conveyor drive output RPM. In case of RPM change, the machine should shut off automatically. _ Dual side pawl conveyor driven by a 1/6 HP motor to ensure simultaneous and even rack movement. _ Double-wall insulated hinged doors. _ Slanted, self-locating one-piece scrap screen and a deep soil collection basket. _ Tank and chamber constructed of #16-gauge stainless steel. _ 2 HP wash pump motor with inherent overload protection and manual reset. _ Stainless steel, self-draining pump and impeller mounted above the water line for longer life. _ Pumped rinse provides consistent rinse performance in continuous operating condition without pressure regulating valve for incoming water pressure less than 65 PSI. _ Single-point electrical connection including the electric booster heater. (field convertible to dual point electrical connection) _ Dishmachine to be provided with 0.5 hp final rinse pump. _ Integrated stainless steel pump intake screen. _ Electrical interface points for easy chemical pump connections. 5. Field Installed Optional Accessories: _ Two (2) E-Series Adjustable Standard Vent Hoods. _ Table Limit Switch. _ Three (3) Sheet Pan Racks. 6. Maintenance and Service: _ Installation by manufacturer trained and authorized technicians only. _ Installation to include: _ Removal and disposal of existing Hobart C44A dishwasher. _ Delivery and set in place of the new dishwasher and accessories. 6 _ Final connections of properly sized electric, plumbing and ventilation. _ Providing properly sized utilities (electrical/plumbing) by Union Area _ Free Factory Start up. _ 6 months of extended warranty when Hobart Service completes installation - totaling an 18-month manufacturer warranty