Site work for a water / sewer project in Lakewood, Colorado. Completed plans call for site work for a water / sewer project.

Reference Number 0000393506 The City serves approximately 800 customers in the City's water service area located in the northeast corner of the City. Due to aging and outdated equipment that needs to be read manually, the City would like to replace all meters served by the City of Lakewood. Question Deadline 07/31/2025 at 5:00 PM MT Questions are submitted online No Buyer Preferences, Guidelines & Requirements General Requirements - Bid Deposit Required - Contractors License Required - FOB Destination - Insurance Required Bonding Requirements - Bid Bond 5 % - Performance Bond 100 % - Payment Bond 100 % The City reserves the right to reject any or all Bids, in part or in whole, or to waive any informalities or technicalities in this Invitation to Bid if it is deemed to be in the best interest of the City to do so. GENERAL TECHNICAL REQUIREMENTS 1. All meters shall be new, unused, and factory-calibrated. 2. All meters shall be lead-free and NSF 61-G certified. 3. Registers must be encoder-type with an 8-digit display and be Itron 4CXN2 compatible. 4. Each meter must include an integrated remote read cable of specified length. 5. Each meter shall include a factory-installed ERT (Encoder Receiver Transmitter) compatible with Denver Water's AMR/AMI system. 6. Tamper-resistant lids and stainless steel fasteners are required. 7. Each unit must be clearly marked with a serial number traceable to the year of manufacture. 8. Serial number formats and assignments must meet Denver Water's meter data formatting requirements and shall be coordinated with the Denver Water Meters Working Group following contract award. 2.0 METER SPECIFICATIONS AND QUANTITIES Meter Type 623-07006 3/4" Positive Displacement 623-07008 1" Positive Displacement 623-07012 1-1/2" Turbine w/ Test Port 623-07016 2" Turbine w/ Test Port 623-07024 3" Turbo Meter 623-07025 3" Compound Meter A. 3/4" Positive Displacement (PD) Meters Quantity 634 73 69 16 1 2 Quantity: 634 units Type: Positive Displacement, AWWA C700 compliant Lay Length: 9-1/4 inches Materials: Cast iron or polymer body; stainless steel or polymer internals Register: Encoder, 8-digit, 0.1-gallon resolution ERT: One factory-installed encoder receiver transmitter Cable: 5-foot integrated remote read cable Configuration: Street-read with tamper-resistant lid Installation: For information only - refer to Denver Water Standard Drawings 33264 and 33269 B. 1" Positive Displacement (PD) Meters Quantity: 73 units Type: Positive Displacement, AWWA C700 compliant Lay Length: 11 inches Materials: Cast iron or polymer body; stainless steel or polymer internals Register: Encoder, 8-digit, 0.1-gallon resolution ERT: One factory-installed encoder receiver transmitter Cable: 5-foot integrated remote read cable Configuration: Street-read with tamper-resistant lid Installation: For information only - refer to Denver Water Standard Drawings 33264 and 33269 REVISION OF SECTION 623 - BID SCHEDULE A WATER LINES C. 1-1/2" Turbine Meters with Test Port Quantity: 69 units Type: Turbine, AWWA C701 Class II Lay Length: 13 inches Materials: Bronze or stainless steel body Register: Encoder, 8-digit, 1-gallon resolution ERT: One factory-installed encoder receiver transmitter Cable: 25-foot integrated remote read cable Configuration: Includes test port Installation: For information only - refer to Denver Water Standard Drawings 22015 and 33270 D. 2" Turbine Meters with Test Port Quantity: 16 units Type: Turbine, AWWA C701 Class II Lay Length: 10 inches Materials: Bronze or stainless steel body Register: Encoder, 8-digit, 1-gallon resolution ERT: One factory-installed encoder receiver transmitter Cable: 25-foot integrated remote read cable Configuration: Includes test port Installation: For information only - refer to Denver Water Standard Drawings 22015 and 33270 E. 3" Turbo Meter Quantity: 1 unit Type: Turbine, AWWA C701 Lay Length: 12 inches Materials: 316 stainless steel or bronze Register: Encoder, 8-digit, 1-gallon resolution ERT: One factory-installed encoder receiver transmitter Cable: 25-foot integrated remote read cable Configuration: Includes test port; street-read Installation: For information only - refer to Denver Water Standard Drawings 33271 or 33272 F. 3" Compound Meter Quantity: 2 units Type: Compound, AWWA C702 Lay Length: 17 inches Materials: Bronze or stainless steel body Register: Two HR-E mechanical encoder registers ERT: Two factory-installed encoder receiver transmitters (one per register) Cable: 25-foot integrated remote read cable per register Configuration: Sidewalk-read Installation: For information only - refer to Denver Water Standard Drawings 33271 or 33272