Site work for a transportation facility in Vienna, Ohio. Completed plans call for site work for a transportation facility.

Project ZQEL-25-0001 Shortfield Striping & Rubber Removal The work specified herein consists of furnishing all labor, equipment, tools, appliances, transportation, and materials required to remove 95% of the rubber buildup from 100% of designated area on the Youngstown ARS Assault (asphalt covered) Runway. The rubber removal is to be completed without damage to the pavement surface, joints, and joint and crack seals, or any other government property. Destruction of any runway or other pavement markings as a result of the rubber removal process will be restored, repainted as necessary. All LZ Markings, Controlled Apron and Non-Controlled Apron Markings shall be repainted as per specifications and as shown on plans dated 14 May 2025. In Accordance with drawings and specifications in Section J. Magnitude of Construction: The estimated cost of this project is between $100,000 and $250,000. If you have any questions or concerns, please feel free to contact kimberly.hitchcock.1@us.af.mil or joshua.tomor.2@us.af.mil *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. ZQEL 2025-0001 Period of Performance 01 Oct 2025 To 31 Dec 2025 A. The Contractor shall furnish all supervision, labor, materials, tools, equipment, apparatus, and transportation required to complete the construction in conformity with the Contract Documents. B. The Project is for the removal of aircraft rubber removal form the Assault Runway Landing Zone (LZ), and for the restriping of all airfield markings on the LZ and aircraft parking apron and vehicle drive lane. All work is located on the controlled portion of the airfield and on Youngstown Air Reserve Station, Vienna OH. C. The Work consists of - but is not limited to - the following: Air Force Statement of Work: 1.3 SUMMARY OF WORK: The Contractor shall furnish and install/perform all material, equipment, components, parts, tools, labor, transportation, hauling, disposal/recycling, cleaning, inspection, testing, commissioning, training, reporting, etc., necessary to perform this project as described in the contract-delivery order, including this Statement of Work and any/all applicable federal, state and local law, regulation, standards, and codes. Unless otherwise stated, any/all work items includes requirement for contractor to remove and properly dispose of/recycle off base, and to furnish and install/incorporate any/all new materials, equipment, components needed to properly complete the work item; any Government furnished property and/or reinstallation of existing materials/equipment/components shall be as stated/specified herein. Contractor shall submit materials/methods for approval prior to ordering and/or incorporation into the work; as a minimum, submittals shall include product literature, MSDS, standard color, texture and style samples/swatches/boards, and place of origin/manufacture. Demolished materials, waste/debris is property of the contractor, unless otherwise stated herein; contractor is responsible for proper disposal/recycling of such materials off base; such material shall be promptly removed from the installation and shall not be stored/stockpiled unless submitted and approved for such. Contractor is responsible for verification of all details, measurements, etc. prior to ordering materials and execution of work. The work includes, but is not limited to, the following principle elements.