Renovation of a municipal facility in LaSalle, Colorado. Completed plans call for the renovation of a municipal facility.

Reference Number 0000393944 Weld County is seeking bids for a vendor to provide a backup generator for the Peckham Grader Shed. Question Deadline 08/11/2025 at 5:00 PM MT Questions are submitted online No bid open notes : https://teams.microsoft.com/l/meetup-join/19%3ameeting_Y2YxZjg4NzQtNDE2NC00OWMxLTk5MDctYTI4NWFiNDc2MTlm%40thread.v2/0context=%7b%22Tid%22%3a%221aea0321-6d26-4687-8143-0cd51eed5963%22%2c%22Oid%22%3a%223960a4e0-26f1-4d47-8df0-ccea812d4d08%22%7d Meeting ID: 267 902 575 760 Passcode: BS2Jb3zT +1 720-439-5261,,536481959# United States, Denver Phone conference ID: 536 481 959# Specific Requirements and Responsibilities 1. This is a turnkey project which include but not limited to generators, concrete pad, enclosure, and all associated electrical work. 2. All equipment and materials shall be submitted and approved prior to construction. The County Project Manager is to review and approval all colors prior to installation. 3. Work during business hours will be acceptable. This facility is operational 24/7. The contractor will be required to provide uninterrupted power for any major power transfers. The contractor is to minimize any disruptive work and the County reserves the right to shut down any work that is deemed disruptive to the facility operations or clients. 4. Any work being performed in this facility needs to be coordinated one week prior to commencement. 5. All grounding is to be installed per code. 6. Contractor to provide fire caulking or foam for all fire rated penetrations. A detailed submittal of all penetrations is to be provided to the owner / engineer for review and approval. All other non-fire rate penetrations to have a weather tight seal. 7. All supports, raceways, and electrical devices to be submitted and approved prior to construction. 8. Contractor is to be certified for installation of specified generator. 9. Contractor is responsible for filling all appropriate fluids to fully operate and test backup generator. 10. Contractor is responsible for lubricating all necessary components for backup generator. 11. Contractor to adjust and test automatic transfer switch in normal and emergency mode. Starting and testing the system in automatic mode simulating power failures from the utility. Electrical wires, pipes and devices shall comply with UL standard and meet National Electric Codes. 12. All materials and equipment incorporated into the project shall be new unless noted otherwise. The Contractor shall transport and safeguard all materials and equipment