Site work and paving for a road / highway in Harrisburg, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Consists of milling and paving approximately 275 linear feet in length and 26 feet wide of West Street between North Street and North 2nd Street, milling and paving approximately 625 linear feet in length and 18 feet wide of Reiff Street between Pine Street and 2nd Street, milling and paving approximately 150 linear feet in length and 14 feet wide of an alley between Main Street and 3rd Street, milling and paving approximately 150 linear in length and 24 feet wide of an alley between Main Street and 3rd Street, and milling and paving approximately 150 linear feet in length and 16 feet wide between Main Street and 3rd Street. Work under this contract shall include all materials, equipment, supplies, and labor for the construction as shown and specified in the Contract Documents. The successful bidder(s) will be required to fully complete all work within 60 consecutive calendar days from, and including, the date indicated by the Owner in their written Notice to Proceed. Questions and inquiries should be addressed through electronic. The Owner reserves the right to reject any or all Bids, The work will include, but not necessarily be limited to, 2,355 SY of milling, 150 tons leveling course, 230 tons wearing course, and other work specified in the contract. Project Identification: Project consists of milling, leveling course, wearing course, and other work specified in the contract. 1. Project location: Two sections of streets within the Borough as shown on the attached map. N. 28 th Street-From Herr Street to northern Borough boundary S. 30 th Street-From Boas Street to Market Street Road and includes 60 feet of Clayton Street where intersects with S. 30 th *Paving work will begin and end outside of existing crosswalks. 2. OWNER: Penbrook Borough, 150 South 28 th Street, Harrisburg, PA 17103 B. This project shall include furnishing all labor, equipment, material, and appurtenances to complete all work in accordance with the Contract Documents. The work will include, but not necessarily be limited to, the following, as identically numbered in the UNIT PRICE SCHEDULE: 2. Work zone traffic control (1 LS) N. 28 th Street 3. Milling - profile mill full width, up to 2" depth (1,425 SY) 4. Superpave Asphalt Mixture Design Wearing Course, 9.5mm, PG 64S-22, 0.3 to 3 million ESALs, SRL-L, 1.5" depth, complete in-place (140 TON) 5. Superpave Asphalt Mixture Design Leveling Course, 9.5 mm, PG 64S-22, 0.3 to 3 million ESALs, SRL - L, complete in-place (90 TON) 6. Paving Fabric, complete in-place (1,425 SY) 7. Full depth base repair including sawcut pavement, excavate 10" depth, remove material, place 6" depth 2A stone, and 4" depth Superpave Asphalt Mixture Design Binder Course, 25mm, PG 64S-22, 0.3 to 30 million ESALs, complete in-place (100 SY) S. 30 th Street 8. Milling - profile mill full width, up to 2" depth (930 SY) 9. Superpave Asphalt Mixture Design Wearing Course, 9.5mm, PG 64S-22, 0.3 to 3 million ESALs, SRL-L, 1.5" depth, complete in-place (90 TON) 10. Superpave Asphalt Mixture Design Leveling Course, 9.5 mm, PG 64S-22, 0.3 to 3 million ESALs, SRL - L, complete in-place (60 TON) Paving Fabric, complete in-place (930 SY) 2. Full depth base repair including sawcut pavement, excavate 10" depth, remove material, place 6" depth 2A stone, and 4" depth Superpave Asphalt Mixture Design Binder Course, 25mm, PG 64S-22, 0.3 to 30 million ESALs, complete in-place (100 SY) Questions received after 4:00 PM, Thursday, August 7, 2025, regarding the project will not be acknowledged