Site work for a bridge / tunnel in Urbana, Illinois. Completed plans call for site work for a bridge / tunnel.

This work shall include all labor, material, and equipment necessary to completely remove, store, and replace the steel plate beam guardrail in locations as shown on the plans or as directed by the Engineer. The replacement of the guardrail shall be in accordance with Section 630 of the Standard Specifications. All posts and existing guardrail deemed necessary to be removed as directed by the Engineer, shall be disposed of properly by the Contractor. Open excavations shall be backfilled with native material and shall be included in the cost of the pay item. Any portion of the guardrail damaged outside the limits of removal shall be replaced at no additional cost to the Owner. Steel Plate Beam Guardrail including posts and a new standard end section shall be attached to the remaining existing location and follow the existing radius configuration. installed according to Highway Standard 630001, to the satisfaction of the Engineer. Posts shall be Type A, 6 foot posts and shall be installed in accordance with Section 630 of the Standard Specifications. Removal of existing structure and replacement with cast in place 10'x10' double box culvert. Remove and Replace Box Culvert All proposals must be accompanied by a proposal guaranty as provided in Check Sheet LRS-6 Special Provision for Bidding Requirements and Conditions for Contract Proposals prepared by the Department of Transportation. The awarding authority reserves the right to waive technicalities and to reject any or all proposals as provided in Check Sheet LRS-6 Special Provision for Bidding Requirements and Conditions for Contract Proposals prepared by the Department of Transportation. Pre-qualification is required in accordance with Check Sheet LRS-6 Special Provision for Bidding Requirements and Conditions for Contract Proposals