Site work and renovation of a water / sewer project in East Tawas, Michigan. Completed plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

**As of August 26, 2025, this project has not yet been awarded. A timeline for the award has not yet been established.** Exterior: Abrasive blast clean to a SSPC-SP6 commercial standard with containment. Apply a four (4) coat zinc epoxy urethane fluoropolymer system. Dry Interior: Abrasive blast clean the entire bowl and spot coating failures throughout to a SSPC-SP6 commercial standard. Apply a three (3) coat epoxy system to the bowl and a spot two (2) coat epoxy system to the rest of the prepared surfaces. Dry Interior Alternate: Abrasive blast clean the entire dry interior to a SSPC-SP6 commercial standard. Apply a three (3) zinc coat epoxy system to the access tube and bowl and a two (2) coat zinc epoxy system to the rest of the prepared surfaces. The work includes the fill/draw pipe which will require removal and reinstallation of the insulation and jacketing. Foundation: Abrasive blast clean and apply a two (2) coat epoxy system. Cathodic Protection: Install an impressed current cathodic protection system. Mixer: Install a mechanical mixer. Repairs: 1) Install a gasket on the wet interior roof hatch. 2) Install insulation on a section of the fill/draw pipe. 3) Pit welding. 4) Install boots over the antenna cable penetrations on the riser and roof. 5) Replace the aviation light. 6) Replace the dry interior light bulbs. 7) Install grounding rods for the structure. Bid Bond : 10% The Bidder shall submit all questions about the meaning or intent of the Bidding Documents to DIXON in writing. Questions received less than seven days prior to the date for the opening of Bids may not be answered.