Demolition, site work, new construction and renovation of an educational facility in Long Beach, California. Completed plans call for the construction of a 241,000-square-foot educational facility; for the demolition of a educational facility; for the renovation of a educational facility; and for site work for a educational facility.

As of November 4, 2025, all trades have been awarded. Construction will begin shortly. The overall objective of the project is to design and renovate the existing University Student Union ("USU") building, approximately 180,000 GSF. This includes approximately 160,000 GSF of interior area and 20,000 GSF of outdoor covered walkways and seating areas. The project scope also includes the demolition of the existing University Dining Plaza (UDP) building, and the design and new construction of an approximately 61,000 GSF building addition. The new construction is expected to be a Type 1B structure. Project milestone, Onsite Construction, completion is scheduled for May 15 2028. Provide labor to support general site maintenance, maintenance of walkways and common areas, Minor protection and temporary barriers, Material handling and delivery assistance, Rough carpentry support including blocking, backing, and safety railings, Temporary fencing and signage maintenance, Safety compliance assistance (fire extinguishers, access paths, etc.), and other day-to-day labor activities as needed throughout the construction lifecycle. Please note that labor needs for the project will fluctuate based on the work being performed. At peak demand, anticipated between August 2026 and May 2028, we expect to need approximately 6-8 laborers and/or carpenters. At no point we anticipate the General Requirements Labor dropping below 2 laborers and/or carpenters. OSHA requirements will be strictly enforced along with PENTA's safety program and anyone not complying with these requirements will be removed from the job site. o Each employee shall report to PENTA with basic tools including all necessary hand tools and cordless power tools such as a screw gun, impact, grinder, circular saw, and reciprocal saw, Workers shall be provided brooms and shovels by their employer. o All materials will be purchased and provided by The PENTA Building Group. o Exclude cost of Parking. o Bidders shall complete the table below with fully burdened rates for each classification. These rates will remain fixed until the next base rate adjustment issued by the California Department of Industrial Relations (DIR). Any future rate increases shall not exceed the official increases published by the DIR for the corresponding labor classifications and periods. lease complete only the highlighted cells. Hourly Unit Rate (Fully Burdened) Diversity Labor Classification Straight Time (Rn) (4 Decimals Places) Overtime (4 Decimals Places) Double Time (4 Decimals Places) SBE Preference (5%) YES/NO DVBE Preference (5%) YES/NO Estimated % of Labor Hours (Weight as Decimal - Wn) Weighted Amount Carpenter 70% - Apprentice 0.1 Carpenter - Journeyman 0.2 Carpenter - Foreman 0.1 Laborer 80% - Apprentice 0.1 Laborer - Journeyman Group 1 0.1 Laborer - Journeyman Group 2 0.2 Laborer - Journeyman Group 5 0.2 Total Weighted Value Please note that the rates listed in the table above represent the fully burdened actual rates allowable for invoicing, with no additional markups of any kind. PENTA reserves the right to disqualify any bid that appears unbalanced or includes rates that are unreasonably low in one or more labor classifications. Bids must reflect fair, competitive, and compliant pricing in accordance with prevailing wage requirements Request For Bid Packages: If interested in bidding this work, please reach out via email to Justine Helbren at jhelbren@pentabldggroup.com If you have any questions, please contact Justine Helbren at jhelbren@pentabldggroup.com