This is a service / maintenance or supply contract in Conway, South Carolina. Contact the soliciting agency for additional information.

Reference Number 0000396292 Horry County Construction and Maintenance Department located at 307 Smith St, Conway, SC 29526 is seeking Quotes from qualified bidders to manufacture and deliver all required Dry Floodproofing materials - including all mounting hardware, Sealed Engineer Drawings and Dry Floodproofing Certifications for Two Beach Bathroom (Hawes & Nash) projects meeting the following parameters: To be crafted from lightweight marine-grade material Floodproofing Panels to provide 4-sided seal Six Door Panels @ 52" Wide x 86" High x 2" Thick Four Vent Panels @ 30" Wide x 30" High x 1" Thick Eight Window Panels @ 36" Wide x 22" High x 1" Thick Panel Rails to be 1.5" for Vents - Windows & 4" for Doors Extra Long Mounting Hardware FEMA compliant FEMA Approved No Required Tools for Installation for Ease of Deployment Lifetime Product Warranty Shipping/Delivery Product must be able to withstand flooding due to hurricanes, torrential rainstorms, and wind-driven hail. Under the National Flood Insurance Program (NFIP), the dry floodproofing of non-residential buildings may be permitted as an alternative to elevating to or above the Base Flood Elevation (BFE) or for certain flood zones, the natural Highest Adjacent Grade (HAG). A dry floodproofing design certification is required for non-residential structures that are dry floodproofed and the dry floodproofed non-residential portions of mixed-use buildings. FEMA Form 206-FY-21-122 NFIP Residential Basement Floodproofing Certificate is required for the residential portions of mixed-use buildings. A dry floodproofed building is a building that has been designed and constructed to be watertight (substantially impermeable to floodwaters) below the BFE and with structural components having the capability of resisting hydrostatic and hydrodynamic loads and effects of buoyancy. Before a dry floodproofed building is designed, numerous planning considerations, including flood warning time, uses of the building, mode of entry to and exit from the building and the site in general, floodwater velocities, flood depths, debris impact potential, flood frequency, and any other State and local requirements must be addressed to ensure that dry floodproofing will be a viable floodplain management measure. The minimum NFIP requirement is to dry floodproof a building to the BFE. However, to be in compliance with the requirements of American Society of Civil Engineers (ASCE) 24, Flood Resistant Design and Construction, one foot is subtracted from the dry floodproofed elevation. Therefore, a building must be dry floodproofed to one foot above the BFE to be considered for floodproofing credit. For B, C, D, or X flood zones, the building's dry floodproofed design elevation must be at least two feet above the natural HAG to be considered for floodproofing Bid Submission Type Electronic Bid Submission General Requirements - Insurance Required Award Requirements - All or None Award Question Deadline 08/27/2025 at 2:00 PM ET Questions are submitted online Yes