Renovation of an educational facility in St. John's, Newfoundland. Completed plans call for the renovation of a educational facility.

Closing Time: 2:30 PM (NT) ** Please note that there has been 1 addendum issued for this tender. ** Question Acceptance Deadline 2025/09/22 02:30:00 PM NDT The Province, on behalf of Bishop Feild Elementary in St. John's, NL, is requesting bids for the supply, delivery and installation of metal footlockers. 1. The Province, on behalf of NLSchools, invites tender bids for the supply, delivery and installation of metal footlockers for Bishop Feild Elementary, as per the specifications below. SPECIFICATIONS 2. The Province is requesting three (3) sizes for the footlockers: a) Footlocker - Eight (8) Foot Quantity: eight (8) i. ii. All-metal (steel) construction Frame: box-shaped, 1" x 1" angle iron, with 1/8" thickness iv. Mesh Infill: 1" x 1" square, with 1/8" gauge material V. Mesh infill to be attached to all sides of the frame, except for the top and the back vi. Able to be affixed to a wall, with a minimum of six (6) mounting holes in the back of the frame, with at least two (2) holes located at the sides of the back of the frame, as well as at least two (2) holes in the center of the back vii. Dimensions: 96" wide x 6" high x 10" deep b) Footlocker - Four (4) Foot i. Quantity: six (6) ii. All-metal (steel) construction Frame: box-shaped, 1" x 1" angle iron, with 1/8" thickness IV. Mesh Infill 1" x 1" square, with 1/8" gauge material V. Mesh infill to be attached to all sides of the frame, except for the top and the back vi. Able to be affixed to a wall, with a minimum of six (6) mounting holes in the back of the frame, with at least two (2) holes located at the sides of the back of the frame, as well as at least two (2) holes in the center of the back vii. Dimensions: 48" wide x 6" high x 10" deep c) Footlocker - Two (2) Foot Quantity: ten (10). i. ii. All-metal (steel) construction Frame: box-shaped, 1"x1" angle iron, with 1/8" thickness iv. Mesh Infill: 1" x 1" square, with 1/8" gauge material V. Mesh infill to be attached to all sides of the frame, except for the top and the back vi. Able to be affixed to a wall, with a minimum of six (6) mounting holes in the back of the frame, with at least two (2) holes located at the sides of the back of the frame, as well as at least two (2) holes in the center of the back vii. Dimensions: 24" wide x 6" high x 10" deep 3. The Unit Price (per footlocker), as shown in the Stipulated Price Contract, is to include the cost of supply, delivery, and installation. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.