Site work for a civil project in Decatur, Indiana. Completed plans call for site work for a water / sewer project.

The Project includes the following Work: The project includes but is not limited to the installation of approximately 9,455 lineal feet of 6-inch pressure sewer, 45 lineal feet of 2-inch pressure sewer, 615 lineal feet of 1-1/2-inch pressure sewer, 4 grinder pump stations, 1 flow metering structure, and all other work required for the completion of the project. Questions pertaining to this project shall be submitted directly to Chris Ripke, E.I. at Commonwealth Engineers, Inc. via Online. Additional questions concerning access to the website may be directed to Commonwealth Engineers, Inc. at (317) 888-1177. The OWNER reserves the right to reject any bid, or all bids, or to accept any bid or bids, or to make such combination of bids as may seem desirable, and to waive any and all informalities in bidding. Any bid may be withdrawn prior to the above scheduled time for the opening of bids or authorized postponement thereof. Any bid received after the time and date specified shall not be considered. NO bid may be withdrawn after the scheduled closing time for receipt of bids for at least 90 days. Question Deadline 09/25/2025 Bidder shall submit all questions about the meaning or intent of the Bidding Documents to Engineer in writing. Contact information and submittal procedures for such questions are as follows: A. All correspondence should be made thru Procore Interpretations or clarifications considered necessary by Engineer in response to such questions will be issued by Addenda delivered to all registered plan holders. Questions received less than seven days prior to the date for opening of Bids may not be This section covers preparation of surfaces, standard for materials, application standards for interior, exterior, immersed and non-immersed surfaces to be painted. The Contractor shall furnish materials, equipment, tools and labor necessary for total completion. This section is intended to include all work and materials necessary for completion of the work, any incidental item of material, labor or detail required for the proper execution and completion of the work and omitted from this section but obviously required by governing codes, local regulations, trade practices or operational functions, shall be provided as a part of the work without extra charge, even though not specifically detailed or mentioned. B. The object of these specifications is to describe the materials and workmanship necessary to provide complete protection of the surface to be coated and to provide a neat finished appearance. Coating shall be done at such times as the Contractor and Engineer may agree upon in order that dust-free and neat work be obtained. All surfaces shall be prepared and all coatings shall be applied strictly in accordance with the most recent manufacturer's printed instructions and shall be performed in a manner satisfactory to the Engineer. A pre-bid conference will not be conducted for this Project. MBE/WBE Goal (SRF Projects). The Bidder shall be in compliance with all Federal Contract Provisions of Part 11B. The goals for this Project are: 7% MBE and 5% WBE.