Demolition, site work and renovation of a water / sewer project in Camas, Washington. Completed plans call for the demolition of a water / sewer project; for the renovation of a water / sewer project; and for site work for a water / sewer project.

**As of October 20, 2025 , this project has not yet been awarded. The project is expected to be awarded on December 1, 2025.** This Work consists of the construction of all components of Main Pump Station Improvements, including demolition of existing pump station components, pipelines and building HVAC systems, construction of new pump station components, modification of existing components, conduit and equipment for electrical services and controls, construction of building HVAC, restoration, erosion control, bypass pumping, traffic control, and other work, all in accordance with the Plans and these Specifications. All Bid Proposals shall be accompanied by a Bid Proposal deposit in cash, certified check, cashiers check, or surety bond in an amount equal to five percent (5%) of the amount of such Bid Proposal. For questions, please contact Rob Charles, PE, 360-817-7003 or RCharles@cityofcamas.us at the City of Camas. The City of Camas expressly reserves the right to reject any or all Proposals and to waive minor irregularities or informalities and to Award the Project to the lowest responsible bidder as it best serves the interests of the City. The work to be performed under these Specifications and accompanying Drawings consists of furnishing all permits, labor, materials, and equipment necessary for the construction of improvements at the Main Pump Station, including all electrical work, piping and mechanical work, heating and ventilation work, and all work incidental to or necessary for satisfactory completion of the work shown on the Drawings and described in the Specifications. The major components of the work are: 1. Demolition of existing electrical and control equipment, and replacement with new electrical and control equipment. 2. Demolition of existing heating and ventilation equipment, and replacement with new heating and ventilation equipment. 3. Demolition ofselect piping, and installation of new flow meter, valves, and piping. 4. Surface preparation and epoxy coating the existing pump station wetwell