Demolition, site work and new construction of a water / sewer project in Palm Desert, California. Completed plans call for the demolition of a water / sewer project; for the construction of a water / sewer project; and for site work for a water / sewer project.

Online Q&A Yes 10/16/2025 2:00 PM (PDT) Contact Information Scope of Services The purpose of the work is to construct a replacement well (T-6A) and destroy the existing well (T-6). Artesian flowing conditions should be expected during drilling, construction and destruction. See bid documents for more information. The Successful Proposer shall execute the attached Public Works Agreement and provide the required insurance documents per the Agreement, within fifteen (15) business days after Notice of Award. The Successful Proposer shall provide payment and performance bonds in a sum no less than 100% of the contract price within fifteen (15) business days after Notice of Award. The location of the work is in the Dos Palmas Preserve, located about 1 hour south of Palm Desert, California. The approximate location of the well is 33.504999, -115.817751. The well and land is owned by San Diego County Water Authority and is surrounded by land owned by BLM. The property is partially surrounded by fencing. Access to the property is through locked gates. Contractor will utilize the attached well destruction and construction sketch to perform the following work. A. The destruction work will include: 1. Obtaining a well destruction permit 2. Mobilization to the site including site preparation to reach the well 3. Destroying the well per county standards 4. Upon completion of the work, the contractor shall prepare and submit to the California Department of Water Resources a Well Completion Report and providing copies to the Owner and the County. B. The work to construct a replacement well will consist of: 1. Obtaining a well drilling permit (provide a copy to the Owner prior to start of construction) 2. Mobilization 3. Drilling a borehole to 120 feet below ground surface 4. Performing a geophysical survey 5. Placing a 50 foot conductor casing and sanitary seal 6. Reaming the borehole 7. Furnish and install 8-inch diameter PVC well casing and screen (Certa Lok) 8. Furnish and install 20 feet of 8-inch diameter low carbon steel for the upper portion of the well 9. Placing a filter pack around the casing and screen 10. Installing a bentonite transition and concrete annular seal 11. Developing the well 12. Installing a well head 13. Installing a concrete pad 14. Demobilization