Site work for a water / sewer project in Huntington Beach, California. Completed plans call for site work for a one-story above grade water / sewer project.

The project consists primarily of the installation of tide check valves at seven different locations and the removal of an existing flap gate and a duck bill gate valve at various locations as shown in Appendix E. The new valves will be in-line check valves of varying sizes. The intent of the installation/maintenance of check valves is to mitigate flooding during king tides. The check valves are to be installed within the storm drain system with minimal impact to the existing system. Detailed maps and location information are referenced in Appendix E. It is anticipated that the check valves will be installed via water side, and the contractor must launch their boat from a location agreed upon by the City. The cost for the boat must be included in each check valve installation as detailed per bid item. Online Q&A Yes Q&A Deadline 10/21/2025 5:00 PM (PDT) RESPONSE TO QUESTIONS TO OCTOBER 23, 2025 All questions related to this bid solicitation must be submitted through the online The project consists primarily of the installation of tide check valves at seven (7) different locations and the removal of an existing flap gate and a duck bill gate valve at various locations as shown in Appendix E. The new valves consist of in-line check valves of varying sizes. The purpose for the installation/maintenance of check valves is to mitigate flooding during king tides. The check valves are to be installed within the storm drain system with little to no impact to the existing storm drain system. Detailed information including maps relating to the locations and quantities can be found in Appendix E. It is anticipated that the check valves will be installed via water side and the Contractor must launch their boat from a location agreed upon by the City. The cost for the boat must be included in the cost for each check valve installation, proportioned accordingly per each bid item. The Engineer's Estimate is $170,000. The scope of work consists of the installation of in-line check valves at the locations identified in Appendix E. Installation of check valves shall be per manufacturer recommendations. Any work performed by the Contractor or its subcontractors that nullifies the warranty of the inline check valves will not be compensated by the City. The Contractor must bear the full cost of installing the in-line check valves to the satisfaction of the Engineer. It is anticipated that the check valves will be installed via water side and the Contractor must launch their boat from a location agreed upon by the City. The cost for the boat must be included in the cost for each check valve installation, proportioned accordingly per each bid item. 1. Near Bluewater Lane and Travel Way 2. Near Anderson Street and Pacific Circle 3. Near Admiralty Road and Grimaud Lane 4. Near 17th Street and Pacific Coast Highway (CA-1) 5. Santa Barbara Lane and San Clemente Circle 6. Typhoon Lane and Venture Drive 7. Intrepid Lane and Remora Lane