Renovation of a mixed-use development in North Tonawanda, New York. Completed plans call for the renovation of a educational facility.

Contract 103 - General Trades 1. Project Location: DRAKE ELEMENTARY SCHOOL 380 DRAKE DRIVE NORTH TONAWANDA, NY 14120 40-09-00-01-0-003-011 TRANSPORTATION CENTER 100 RIDGE RD TONAWANDA, NY 14120 40-09-00-01-5-018-005 OHIO ELEMENTARY SCHOOL 625 OHIO STREET NORTH TONAWANDA, NY 14120 40-09-00-01-0-014-015 SPRUCE ELEMENTARY SCHOOL 195 SPRUCE STREET NORTH TONAWANDA, NY 14120 40-09-00-01-0-011-015 INTERMEDIATE SCHOOL 1500 VANDERBILT AVENUE NORTH TONAWANDA, NY 14120 40-09-00-01-0-016-019 MIDDLE SCHOOL/HIGH SCHOOL 405 MEADOW DRIVE NORTH TONAWANDA, NY 14120 40-09-00-01-0-015-028 Bid bond payable to the owner shall be submitted with each bid in the amount of 5 percent of the bid amount. No bids may be withdrawn for a period of 60 days after opening of bids. Owner reserves the right to accept or reject any and all bids, to re-advertise for new bids and to waive informalities and irregularities in connection with any bid. A. Bidders must be properly licensed under the laws governing their respective trades and be able to obtain insurance and bonds required for the Work. A Performance Bond, a separate Labor and Material Payment Bond, and Insurance in a form acceptable to Owner will be required of the successful Bidder. B. All potential bidders must be able to self-perform a minimum of 20% of the work associated with the contract that they submit bids for. Proof of self performance shall be provided following the bid as required in the instructions to Bidders. All questions, interpretations, clarifications, etc. pertaining to the bid documents must be made in the separate form provided on the next page and emailed to the following: - Brandon Small (brandonsmall@youngandwright.com) - Victoria Waleszczak (victoria@youngandwright.com) - Jessica Rote (jrote@youngandwright.com) with the email subject North Tonawanda CS - Capital Improvement Project 2024 Phase 1B at least seven days prior to the bid opening. All questions are to reference a drawing number or specification section with page number.