This is a service / maintenance or supply contract in Cumming, Georgia. Contact the soliciting agency for additional information.

Three lnovairXM-30 Blowers. Cumming Utilities is soliciting sealed bids from qualified manufacturers or suppliers for the provision of Aerobic Digester Blowers for the Bethel view Advanced Water Reclamation Facility. All equipment shall meet the performance and technical requirements outlined below. Equipment Summary Manufacturer : Inovair Manufacturer's Model : Inovair IM-30 Total Blowers Required: 3 Units. Rated Air Temperature (Normal) 68F Maximum Air Temperature 100F Minimum Air Temperature 40F Rated Capacity 1,750 scfm Maximum Rated Discharge Pressure 11.6 psig Barometric Pressure [TBD] Site Elevation 1090 ft above MSL Relative Humidity 80% avg. Equipment Specifications Casing & Heads: Cast Iron Impellers: 7075 T-6 Aluminum Shaft: 8620 Stainless Steel Bearings: Anti-friction Seals: Carbon face Base: Steel with anti-vibration strips Finish: Corrosion-protective Number of Stages: 1 Operating Speed: [As specified] Interstage Sealing: [As specified] Lubrication: Oil System. Motor Specifications Type: Inverter Duty, High Efficiency, Squirrel-Cage Induction (NEMA MG1 compliant) Power Rating: 125 HP Voltage: 480 V Phase: 3 Frequency: [TBD] Mounting: Horizontal Enclosure: TEFC Service Factor: 1.0 or 1.15 VFD Compatibility: Variable Load Class; VFD provided by Owner Winding Protection: Embedded thermal protection Hazardous Location Compliance: UL 674 certified. Evaluation Criteria Bids will be evaluated based on the following: Compliance with technical specifications Manufacturer qualifications and references Warranty and support services Delivery lead time Price competitiveness. Cumming Utilities reserves the right to accept or reject any or all bids, to waive informalities, and to accept the bid deemed in the best interest ofthe project and the Owner.