Site work for a water / sewer project in Churchill, Manitoba. Completed plans call for site work for a water / sewer project.

Reference Number 0000334976 Question Acceptance Deadline Oct 29, 2026 12:00 AM CDT RCMP Churchill Detachment Generator Replacement Scope of Work Summary The project generally consists of the replacement of the existing standby generator and associated emergency power equipment at the RCMP Churchill Detachment in Churchill, Manitoba. The work includes removal of the existing 50 kW propane generator, existing automatic transfer switch, associated feeders, controls and concrete pad; installation of a new BGIS-supplied 80 kW outdoor propane standby generator; supply and installation of a new automatic transfer switch, associated electrical distribution modifications, power/control wiring and auxiliary connections; installation of a new propane storage tank, concrete pads, underground conduits/feeders and secured generator enclosure/fencing; and restoration of disturbed site areas. The Contractor shall also provide temporary standby power to maintain facility operation throughout the replacement work and complete all required testing, start-up and commissioning of the new emergency power system. RCMP Little Grand Rapids Detachment Generator Replacement Scope of Work Summary The project generally consists of the replacement of the existing standby generator and associated emergency power equipment at the RCMP Little Grand Rapids Detachment in Little Grand Rapids, Manitoba. The work includes removal of the existing indoor 100 kW diesel generator, automatic transfer switch and associated control/communication wiring; installation of a new BGIS-supplied 100 kW indoor diesel standby generator; supply and installation of a new automatic transfer switch, permanent exterior load bank, generator auxiliary equipment, control/communication wiring and remote annunciation; reuse and reconnection of suitable existing power feeders; and connection of the new generator to the existing diesel fuel, ventilation and exhaust systems. The Contractor shall also provide temporary standby power throughout the replacement work and complete all required testing and commissioning, including full-load testing of the new generator system.