Renovation of a mixed-use development in Detroit, Michigan. Completed plans call for the renovation of a medical facility.

The work requires the contractor to furnish all labor, materials, supervision, equipment, and all other resources necessary to fully complete the Upgrade TV System in accordance with the contract specifications and drawings. The scope includes performing all work identified in the Important Bidder Information, complying with the defined scope of work, and meeting all bid submission requirements. The project magnitude is between $500,000 and $1,000,000 and the work must be completed by a Service-Disabled Veteran-Owned Small Business capable of performing under NAICS code 236220. Location: John D. Dingell VA Medical Center, 4646 John R Street, Detroit, MI 48201 Magnitude of Construction: Between $500,000 and $1,000,000. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Detroit VAMC is requesting a Construction Contractor to provide construction services to install a Digital TV Infrastructure in Building 100 at the 1.4 million sqft. Detroit VAMC. Contractor shall furnish all labor, tools, materials, and equipment to install a 1.4 telecom system associated with the VHA Master Specifications for the requested work at the John D. Dingell VA Medical Center as required by this statement of work and drawings. Contractor shall procure, install, test, and label approximately 6000 linear feet of fiber optic cable and provide pull strings including supplying all patch cables. Testing shall provide all installed cable lengths and passing of continuity. Labeling shall be placed at all ends of cables and conduit. Contractor shall procure and install all necessary cable raceways with 1" (green powder coated) EMT conduit, 1" flex conduit where necessary, j-boxes, j-hooks, fittings, and hardware. All fiber optic cable connectors shall be punched down and terminated. Contractor shall assemble and install up to 40 networking cable mitigation boards, (4'x4' AC grade 3/4" trade size firerated plywood backboard painted high-gloss white with two coats of fire-resistant paint), and shall procure and install up to 45 Fiber distribution boxes for multiple single and multi-mode cables. Contractors shall use HILTI-FS1, facility unique brand name, fire stopping and installing at both ends of all raceway penetrations. Contractors shall be responsible for all areas of work associated costs that require safety and infectious control measures. Contractors shall seal electrical closet/work area doors with 6mm or greater plastic with dust barrier zippers and follow all prevention control measures IAW the facilities permits, quality controls, and risk assessments. Contractors shall acquire and set up an air scrubber with duct work up to the exhaust fans shrouds and install sticky mats at the doors prior to any work in any area. Contractors shall assemble and install all government furnished equipment; up to 35 new networking racks, up to 45 rack mounted uninterrupted power supplies, up to 40 racks mounted ethernet switches, up to 80 fiber optic transceivers, and up to 45 rack mounted keystone patch panels. During assembly of the racks, if needed the contractor shall furnish materials/adapters for mounting equipment. All equipment shall be bonded and grounded. Contractor shall wipe down installed equipment, remove all excess and existing materials, and sweep and mop the floors to all work areas when completed. All deducted or unassociated work on the drawings for CAT6A and power drops and any other work not stated in this statement or on the drawings will be completed by others. To obtain clarifications and/or additional information concerning the solicitation requirements, specifications and/or drawings, or any other issue pertaining to the advertisement for bids, submit a written RFI utilizing the RFI Form attached to this solicitation and send via email to the attention of Contract Specialist Angelo.Vivio@va.gov. Deadline for submission of RFIs for this solicitation is 04-17-2026.