Site work and renovation of an educational facility in Bay City, Michigan. Completed plans call for the renovation of a educational facility; and for site work for a educational facility.

A Bid Security by a qualified surety authorized to do business in the state where the Project is located in the amount of five percent (5%) of Base Bids shall accompany each proposal or proposal combination. The Bid Security may be in the form of a Bid Bond, Cashier's Check, or Money Order The Owner will award contracts on or about Monday, January 26, 2026, to separate prime contractors for separate bid divisions or combinations of bid divisions. A. Section Includes: 1. All cabinets and casework, including tops, ledges, supporting structures, and miscellaneous items of equipment as listed in these specifications, or equipment schedules including delivery to the building, setting in place, leveling, scribing to walls and floors as required. Furnish and install all filler panels, knee space panels and scribes as shown on drawings. Installation shall be completed by a factory certified installer. 2. Furnish and deliver all utility service outlet accessory fittings, electrical receptacles and switches, as listed in these specifications, equipment schedules or as shown on drawings as mounted on the laboratory furniture. Items shall be furnished with supply tank nipples and lock nuts, loose in boxes and properly marked. All plumbing and electrical fittings will be packaged separately and properly marked for delivery to the appropriate contractor. 3. Furnish and deliver, packed in boxes for installation by the mechanical contractor, all laboratory sinks, cup sinks or drains, drain troughs, overflows and sink outlets with integral tailpieces, which occur above the floor and where these items are part of the equipment or listed in the specifications, equipment schedules or shown on the drawings. Integral tailpieces when required shall be in accordance with the manufacturer's standards. All tailpieces shall be furnished less the couplings required to connect them to the drain piping system. 4. Furnish service strip supports and set in place service tunnels, service turrets, supporting structures and reagent racks of the type shown on the details. 5. Remove of all debris, dirt and rubbish accumulated as a result of the installation of the laboratory casework to an onsite container provided by others, leaving the premises clean and orderly. A. Furnish and install an electronic, frequency-controlled sound system in accordance with these specifications. B. Provide new materials and equipment that conform to the applicable requirements of Underwritersi Laboratories (UL), National Electrical Code (NEC), and all applicable local codes. C. This specification represents information solely concerned with the sound system. Refer to specifications of other trades and contractors for items that might affect the work under this section. D. All material and equipment needed for proper operation of the system not specified or described herein shall be deemed part of the specifications.