Renovation of an educational facility in Montpelier, Idaho. Working plans call for the renovation of a educational facility.

As of 1/14/2026, all bids were rejected. The project will be rebid. The following work will be performed to the existing elevator and may not be all inclusive. Work must be completed by July 31st, 2026 and may commence as early as January 19th, 2026 (some restrictions will apply if started prior to the end of the school year). All work must meet state, local and industry standards and codes. Contractor must have an Idaho Public Works License and provide proof of liability insurance. Sealed bids must be submitted to Bear Lake School District. Bids will be accepted until 4:00 PM MST Monday, January 12th, 2026. Type: Custom Sized Twin Post Hydraulic Capacity: 2100 Lbs. Speed: 100 FPM Up, 100 FPM Down Hoistway: 7’-4” W x 6’-0” D Minimum Pit Depth: 4’-0” Overhead: 12’-9” Minimum Travel: 24’-9” Stops/Openings: Three (3) Stops, Three (3) Front Openings Machine Room: Adjacent Controls: Non-Proprietary, Smartrise Controller; 208 VAC - Three Phase, 78.2 AMPS, Solid State Starting Operation: Simplex Selective Collective Entrances: 3’-0” W x 7’-0” H, Single Speed, Side Opening, Aluminum Sills Finish: Baked Enamel Doors and Frames at all landings Door Operator: D.C. Door Operators; 3-D Infrared Door Detectors Fixtures: CAR • Main Car Operating Station w/ Standard Floor Push Buttons • Stainless Steel #4 Finishes • Keyed Fan / Light, Run-Stop, Door Open / Close, Alarm Button, Independent Service Switch, ADA Telephone, Car-Riding Lantern HALL • Standard Buttons • Stainless Steel #4 Faceplates Cab: Shell- Applied Laminate Fronts- Stainless Steel #4 Doors- Stainless Steel #4 Ceiling- LED Lighting w/ Lexan Diffusers Handrails- 2” Flat Sills- Aluminum Access- Two Speed Fan, Seismic Zone Provisions, Pit Ladder. Finished floor by others.