Site work and paving for a civil project in La Motte, Iowa. Completed plans call for site work for a water / sewer project; road / highway; and for paving for a road / highway.

The Project consists of water distribution system piping and accessories, utility extensions, high-capacity municipal well, on-site generator, street patching, water system controls, and a municipal well house building as shown on the plans, indicated in the specifications, and detailed in the "Iowa Statewide Urban Design and Specifications (SUDAS)", as modified. Bids shall be on a lump sum and unit price basis, with additive alternate bid items as indicated in the Bid Form. Contract No. 1 - Low bidder - Shawver Well Co. - $804,513 Contract No. 2 - Low Bidder - Shift Companies - $707,920 The City encourages Minority-owned Business Enterprises (MBE's), Women's Business Enterprises (WBE's), Disadvantaged Business Enterprises (DBE's), and Small Businesses in Rural Areas (SBRA's) to submit bids. The OWNER reserves the right to waive any informalities, or to reject any or all bids, or any part of a bid, and to award the Contract to the Bidder, who in the judgment of the OWNER, will best serve the interest of the OWNER. The Work will be substantially completed on or before March 26, 2027 ; Final completion- April 2, 2027. MBE (0.6%), WBE (6.9%) Question Deadline 01/30/2026 Questions received less than three days prior to the date for opening of Bids may not be answered. Written inquiries shall be mailed or hand delivered to Jordan Fure, P.E., Delta 3 Engineering, Inc., 875 S. Chestnut Street, Platteville, Wisconsin, 53818. Electronic inquiries shall be emailed to the following email address: furej@delta3eng.biz with the subject line "Proposed Municipal Well #3 ". a. Location: 1) La Motte Recreation Park adjacent to County Trunk Highway 'D55' in La Motte, IA 52054. b. Description of Work to be completed: Construction of a municipal well for the City of La Motte. Work includes: 1) Installation and maintenance of erosion control measures. 2) Well Construction: a) Drill well shaft to the diameters and depths as shown on the plans and specifications. b) Installation of 18" diameter temporary casing to a depth of 40 feet or to solid bedrock. c) Installation of 12" diameter permanent casing (0 feet to 630 feet depth) d) Installation of bentonite seal as shown and specified. e) Grouting installations and procedures. f) Well Construction documentation. g) Install a temporary well pump and related piping to complete a Yield and Drawdown Test in accordance with Iowa Administrative Code. h) Disinfect well by chlorination in accordance with Iowa Administrative Code. i) Complete the quality sampling, bacteriological sampling and monitoring of the new well as required in the Iowa Administrative Code. A complete chemical analysis shall be run on samples collected near the end of the pumping test. 3) Well #3 Well Pump: a) Installation of the well pump and well column. b) Installation of the 6" check valve. c) Installation of the pump motor. d) Electrical connection of well pump. e) Well Pump Testing and adjustments. 4) Well #3 Discharge Piping Installation: a) Well Vent. b) Elbow Base. c) Flanged Spool Pieces. d) 6" Expansion joint. e) Pipe Supports. f) Raw Sample Tap. g) Air Release Valve. h) Check Valve. i) Flowmeter. j) Gate Valve. k) Pressure Gauge. l) Chemical Addition.