Renovation of a mixed-use development in Sylvan Lake, Alberta. Completed plans call for the renovation of a municipal facility.

The Town of Sylvan Lake invites qualified vendors to submit proposals for Phase 2 of our Security System Upgrades. Phase 1 standardized on Hanwha Wisenet X Series NVRs and Hanwha Q Series cameras. To maintain consistency and compatibility, only vendors who can supply and configure Hanwha Wisenet products--specifically Wisenet X Series NVRs and Q Series cameras--will be considered. Project Objectives: Expand and upgrade the municipality's security camera infrastructure across multiple sites. Ensure seamless integration with existing Hanwha Wisenet systems and mixed-brand environments (HikVision, Axis). Provide end-to-end programming, configuration, testing, and documentation. Optimize coverage and reliability for critical municipal locations, with future scalability in mind. The vendor shall provide hardware (as specified), installation, cabling, mounting, configuration, programming, testing, and commissioning at the following locations: Location 1: Modular Supply and install new Hanwha Wisenet X Series NVR Install 4 new Hanwha Q Series exterior cameras Programming and integration as required Location 2: WCC (Community Centre) Install 1 new exterior Hanwha camera on parking lot light fixture Upgrade existing 16-channel Wisenet NVR to 32-channel Wisenet NVR Programming to integrate new camera Location 3: Tournament House Install 1 new exterior Hanwha camera Tie camera back to either the Modular NVR or WCC NVR Programming as required Location 4: Firehall Re-purpose 16-channel Wisenet NVR from WCC Integrate 4 existing HikVision cameras Programming as required Location 5: Library Supply and install new Hanwha Wisenet X Series NVR Integrate 6 existing HikVision camers Programming as required Location 6: Waste Transfer Station Supply and install new Hanwha Wisenet X Series NVR Install 2 new exterior Hanwha cameras and integrate 6 existing HikVision cameras Programming as required Location 7: Lakeshore Washrooms Replace existing 4-channel Wisenet NVR with 16-channel Wisenet NVR Programming as required Location 8: Lakeshore Pier Install 1 dual-sensor and 2 multi-sensor Hanwha cameras Point-to-point wireless backhaul to Lakeshore Washrooms NVR Location 9: Leaderfield Re-purpose existing 4-channel Wisenet NVR from Lakeshore Washrooms Install 1 new indoor Hanwha camera Programming as required Location 10: NexSource Centre Install 1 new exterior and 1 new indoor Hanwha camera Programming to tie to existing Wisenet NVR Location 11: North Reservoir Supply and install new Hanwha Wisenet X Series NVR Integrate 14 existing Axis cameras Programming as required Location 12: South Reservoir Supply and install new Hanwha Wisenet X Series NVR Integrate 15 existing Axis cameras Programming as required Location 13: Municipal Government Building Install 1 new indoor and 1 new exterior Hanwha camera Programming to tie to existing Wisenet NVR Technical and Implementation Standards: Hardware: Hanwha Wisenet NVRs and Hanwha cameras only (no substitutions) Integration of HikVision and Axis cameras via ONVIF where applicable Cybersecurity: Change default credentials, enable encryption, update firmware Deadline for Questions February 9, 2026 @ 4:00pm