Site work for a water / sewer project in Statesville, North Carolina. Completed plans call for site work for a water / sewer project.

A request for proposals is being issued for the replacement of WTP flocculators and flash mixer. Bids are to be received at 227 S. Center Street, Basement, Statesville, NC 28677, on or before 2:00 p.m. EST on April 10, 2026, at which time and place the bids will be publicly opened and read. A minimum of three bids must be received for all bids to be opened. Participation is encouraged from businesses owned by minorities, women, disabled, disabled business enterprises, and non-profit work centers for the blind and severely disabled. any questions regarding this request, contact Harry Hull, Public Utilities Supervisor, at 704-878-3441 or email hhull@statesvillenc.net. A. Provide all labor, materials, equipment, anchorage systems, and incidentals necessary for the installation, testing, and placing into operation twenty (20) flocculators, one (1) flash mixer, and twenty (20) NEMA 4X VFDs and one (1) VFD control panel in NEMA 4x Enclosure, and associated appurtenances at the Statesville Water Treatment Plant. B. For the purposes of this Section, "Manufacturer" shall mean the designer, manufacturer, supplier and tester of the replacement equipment. The Manufacturer shall be responsible for the design, coordination, testing, and satisfactory performance of all the components. Inclusion of a specific manufacturer's name in the Specifications does not mean that the specific manufacturer's standard product will be acceptable. Specified manufacturer's or other manufacturer's standard product shall be modified as required to meet the Specifications. C. The Manufacturer shall have unit responsibility for coordinating the proper equipment mounting system to ensure stable equipment operation. The Contractor shall install, anchor, test, and align the equipment such that vibration levels are within Manufacturer's recommended tolerances. The Contractor shall provide all supports, stiffeners, etc., that may be required to provide systems that operate reliably and within vibration limits specified by the Manufacturer. D. All equipment shall be suitable for continuous operation (24 hours per day, 365 days per year). E. The Manufacturer shall have a factory authorized service center within 2 hour driving time of the project location that is capable of performing a complete repair of the flocculator and flash mixer units. The service center should have adequate equipment, inventory and personnel to perform repairs and rebuilds to the equipment. The service center shall have complete push-pull equipment and crews which can be onsite within 24 hours of notification. Service centers without in-house push-pull capabilities will not be acceptable.