Renovation of an educational facility in Wellsville, Utah. Completed plans call for the renovation of a educational facility.

1. Removal and disposal of all existing carpet in classrooms, offices, media center, choir platform area, ramps, and all other currently carpeted instructional and administrative areas. 2. Removal of all corridor VCT flooring and associated adhesive. 3. Installation of new carpet in all areas identified above. 4. Existing VCT in Art rooms and Storage rooms shall remain and is excluded from replacement. 5. In Kindergarten and lower-grade classrooms where small VCT areas exist at the sink or wet work areas, those VCT sections shall be removed and replaced with carpet as part of this project. These areas are typically located immediately adjacent to classroom sinks and were historically installed as moisture protection zones. The District's intent is to remove the remaining VCT sections and provide a consistent carpet finish across the entire classroom floor. Bidders shall field verify these locations and include removal of the VCT and installation of carpet in these areas as part of the base bid. 6. In addition to the primary classroom, office, and instructional spaces identified above, bidders shall include the replacement of existing carpet in smaller associated areas such as closets, storage rooms serving carpeted areas, small offices, or similar incidental spaces where carpet currently exists. The intent is to achieve a consistent carpet finish throughout areas that presently have carpet. These smaller incidental spaces shall be treated as carpet-for-carpet replacement only. Hard surface flooring in these types of rooms is not intended to be converted to carpet, except for the corridor areas specifically identified elsewhere in this IFB, where existing VCT flooring will be removed and replaced with carpet. Bidders are responsible for field verification and shall measure and include these types of carpeted incidental spaces in their base bid. Liquidated damages of $500 per calendar day shall apply for failure to meet the completion deadline. All questions must be submitted through U3P during the posted Question-and-Answer period. Question & Answer Deadline: Wednesday, March 26, 2026 – 3:00 PM (MST) Responses and addenda will be posted on U3P. Bidders are responsible for reviewing all posted answers and addenda prior to submission.