Remodeling of an office development in Mayfield Heights, Ohio. Completed plans call for the remodel of a office development.

Fabricate and install one gate and wall to connect to modular cabinets at the Mayfield Heights Driver Exam Station. Please refer to attached documents and drawings for the full scope of work. Site visits can be arranged by contacting the provided individual. Zero and negative unit prices and labor are allowed. Any questions about the bid process or compliance requirements please contact: Donna Wood Planner, Ohio Department Public Safety 1970 West Broad Street, Suite 428 Columbus, Oh 43223 DLWood@dps.ohio.gov Question Deadline 04/03/2026 at 10:00 AM ET SCOPE OF WORK o Fabrication and installation of One (1) gate with support wall installation. o Provide gate unit shop drawings for approval by owner before fabrication o Gate door dimensions: 3'-0" w x 3'-4-3/16" h x 1-3/4" d o Gate panel dimensions between ADA workstation and wall: 5'-0-1/2" w x 4'-3/4" h x 4-7/8" d o Gate return panel dimensions: 3' w x 4'-3/4" h x 4-7/8" d o Gate to be constructed to meet AWI "Custom" grade, except where for stringent than indicated o All exposed surfaces shall be laminated except where otherwise noted. o ADA Door Level: ADA compliant lever bed and bath lock set, finish is chrome. o Gate Hinges: Spring gate pivots by Hardwaresource (www.hardwaresource.com) or equal SKU No.: To be determined based on finish selection o Contractor to install gate level, true and plumb and ensure that the gate opens and closes smoothly o Upon installation, gate unit must be cleaned with a product (such as mineral spirits) to remove all residue and leave a clean appearance. o Shop drawings with measurements are required. Please include these costs in your estimate. o Support walls to be installed with leg levelers. o Support walls to be attached to the modular workstations with appropriate hardware. Additional attachment points to be determined. Materials: o HPL Plastic laminate to be determined o All hardware finishes to be determined Mayfield Heights Gate: • Provide gate unit shop drawings for approval by owner before fabrication • Gate door dimensions: 3’-0” w x 3’-4-3/16” h x 1-3/4” d • Gate panel dimensions between ADA workstation and wall: 5’-0-1/2” w x 4’-3/4” h x 4-7/8” d • Gate return panel dimensions: 3’ w x 4’-3/4” h x 4-7/8” d • Gate to be constructed to meet AWI “Custom” grade, except where for stringent than indicated • All exposed surfaces shall be laminated except where otherwise noted • ADA Door Level: ADA compliant lever bed and bath lock set, finish is chrome • Gate Hinges: Spring gate pivots by Hardwaresource (www.hardwaresource.com) or equal SKU No.: To be determined based on finish selection • Contractor to install gate level, true and plumb and ensure that the gate opens and closes smoothly • Upon installation, gate unit must be cleaned with a product (such as mineral spirits) to remove all residue and leave a clean appearance • Shop drawings with measurements are required, please include these costs in your estimate • Support walls to be installed with leg levelers • Support walls to be attached to the modular workstations with appropriate hardware, additional attachment points to be determined