Site work for a playground / park / athletic field in Fountain Valley, California. Completed plans call for site work for a playground / park / athletic field.

**As of May 15th, 2026, this project has not yet been awarded. The project is expected to be awarded later this month** The City of Fountain Valley, California, is accepting electronically sealed proposals for the Citywide Sports Courts Resurfacing Project (RFB # 26-003). Prospective bidders must obtain Bid Documents, Project Specifications, and Plans, and submit electronically sealed bids exclusively at the City's electronic bidding site via Planetbids. Bids are due by the specified date and time. No late bids will be accepted. Contractor License Certifications required for this project are "A" General Engineering and/or "C33" Painting and Decorating Contractor. Q&A Deadline 04/09/2026 4:00 PM (PDT) Amanda Penaloza, Mgmt. Analyst / Purchasing Officer email: purchasing@fountainvalley.gov Phone No. (714) 593-4413 All proposals examined and declared will be referred to the City Engineer and the City Attorney for examination and presentation to the City Council at their regular meeting in May 2026. SURFACE PREPARATION- To allow for the proper bonding of all new materials, the Contractor shall clean all areas of each sports court with a pressure wash system, prior to start of work. Scrape and thoroughly clean entire surface area of courts utilizing a mechanical, commercial grade, air blowing equipment and scrapers where required, to provide a suitable, consistent, uniform base to install the SportMaster surface. In areas where the existing surface coating shows signs of delamination, the Contractor shall remove all loose or delaminated surface coating by 10,000 PSI hydro-blasting. All water runoff and debris from hydro-blasting will need to be captured and vacuumed by the Contractor per NPDES requirements. Subsequent to the blasting process, the Contractor shall prime the surface in accordance to the coating manufacturer's specifications. The Contractor shall remove all deteriorated or protruding caulking materials at construction joints on all courts to the satisfaction of the City Engineer. Following removal of caulking material at the construction joints, they are to be cleaned to remove debris and shall be re-caulked with Sika Flex 2C SL or equal. The City of Fountain Valley anticipates the removal and installation of approx. 258 LF of caulking.