Renovation of a mixed-use development in North Las Vegas, Nevada. Completed plans call for the renovation of a medical facility.

Installation of sinks for outpatient surgery at the VA Southern Nevada Healthcare System, including furnishing all labor, materials, transportation, required engineering services, overhead, and profit in accordance with the Statement of Work, specifications, and drawings. Work shall be completed within 180 calendar days after issuance of the Notice to Proceed and includes all necessary construction activities to ensure proper installation and functionality. The project requires compliance with applicable regulations, submission of required bonding, and demonstration of capability as a certified Service-Disabled Veteran-Owned Small Business. Location: VA Southern Nevada Healthcare System, 6900 N. Pecos Rd, North Las Vegas, NV 89086, USA The Contractor shall begin performance within 10 calendar days and complete it within 180 calendar days. Questions and/or Requests For Information (RFI) must be submitted using the RFI form attachment and are due No Later Than (NLT) 06-16-2026 at 14:00 P.M. PST. to the Contract Specialist, Christopher Whipple, by email at christopher.whipple@va.gov, and Cc: daniel.jhun@va.gov. REQUISITION/PURCHASE REQUEST NUMBER 593-26-3-5905-0028 Exact Electrical & Grounding Requirements (for electricians) From SOW Page 1, Item 4 : 4. Hydrovac UG electrical trench ensuring pathway does not interfere with concrete footings. Install two (2) 2” RGC above ground and PVC Schedule 40 Pipe underground electrical pathway and a pull wire in one of the conduits. Provide two (2) 125 Amp breaker at existing electrical source and a Christy box. From SOW Page 2, Items 5 & 6 : 5. Install UFER Ground. 6. Install 8’ copper ground rod inside ground rod box 10-1/4” I.D. x 12” (Christy – G3) with label cover “GROUND ROD.” Connect to storage container electrical panel. Summary of What an Electrician Would Need to Do An electrician’s scope for this project would typically include: 1. Hydrovac excavation for the underground electrical trench (must not interfere with the concrete footings or pad). 2. Install two (2) 2” Rigid Galvanized Conduit (RGC) above ground. 3. Install PVC Schedule 40 underground electrical conduit pathway. 4. Install a pull wire in one of the conduits. 5. Provide and install two (2) 125 Amp breakers at the existing electrical source. 6. Install a Christy box . 7. Install a UFER Ground (concrete-encased grounding electrode — this is often coordinated with the concrete pour). 8. Install an 8-foot copper ground rod inside a Christy G3 ground rod box (10-1/4” I.D. × 12”) with a labeled cover reading “GROUND ROD” . 9. Connect the grounding system to the storage container electrical panel .