Site work and renovation of a swimming pool in Wilmette, Illinois. Completed plans call for the renovation of a swimming pool; and for site work for a swimming pool.

Refurbishment of pool slides at the Centennial Aquatic Center. Work includes high-pressure water cleaning, interior sanding and gelcoat application, exterior surface preparation and painting. All bids must be accompanied by cashier's check or bid bond payable to the order of the Wilmette Park District for five percent (5%) of the amount of the bid as provided in the Instructions to Bidders. No proposals or bids will be considered unless accompanied by such bond or check Questions may be directed to John lovinelli , Building Services Foreperson , at jiovinelli@wilpark.org . or Anna Murray , Parks Planner at amurray@wilpark.org Josh Wallace , Superintendent of Parks and Planning at jwallace@wilpark.org ase Bid - Centennial Aquatic Center - Slide Refurbishment INTERIOR : o High -pressure water clean using PAC Detergent in order to remove any grease , oil , dirt , etc. o Remove caulk from seams . o . o Sand entire interior to remove any failed coating and to create an adhesion profile Make all necessary repairs to gelcoat . Apply Maxguard LEI Series Ashland gelcoat (or equal ) with Duratec high gloss additive at 22-24 mils . After cure , wet sand and buff and wax any imperfections with 800 and 1000 grit sandpaper . Re -caulk all seams using Sikafl ex 291 white fast cure . EXTERIOR : o o High - pressure water clean using PAC Detergent in order to remove any grease , oil , dirt , etc. Hand - prepare necessary areas by hand scraping , sanding , and wire brush . Power tool - prepare all rusted surfaces with D.L. sanders , grinders , and wire wheel . Spot prime all necessary areas including bare steel , corroded areas , rigging scrapes , burnishes , and welds using Sherwin Williams Macropoxy 646 . o Finish paint slide exterior using Sherwin Williams Hi Solids Polyurethane or Sherloxane 800 .