Site work and renovation of a road / highway in Readfield, Maine. Completed plans call for the renovation of a road / highway.

Ditching, culvert cleaning, culvert replacement, and shoulder grading on Old Kents Hill Road. Questions regarding this RFP should be referred, in writing, to: Matt Seems Maintenance / Deputy Road Commissioner Email : maintenance1@readfieldmaine.gov Replacement culverts shall be corrugated smooth bore HDPE. Culverts shall be installed to maintain positive drainage and shall match the flow line of the ditch. Couplers shall be used to connect all culvert sections. Culverts shall be set using compacted native material and a minimum of 12" of cover is required unless approved by the Road Commissioner. Smooth transitions are required at all driveways impacted by road work. Driveway connections shall not allow drainage onto the road and the cross slope of the road must be maintained. Gravel shall be compacted. If gravel thickness exceeds four inches, material shall be applied in lifts of six inches or less and each lift shall be compacted with a plate compactor or roller. Ditching shall be performed to return the affected section as near as possible to the original flow line of the ditch unless otherwise specified, and shall in all cases provide for positive drainage. Foreslope shall not be steeper than 3 : 1 and backslope shall not be steeper than 2 :1. Gravel driveway entrances along with paved driveways and roadways must be replaced in kind. The Town requires a minimum of 2' of shoulder from the road edge to beginning of inslope except where not feasible. Disposal of ditching materials shall be the responsibility of the proposer. The Town has a list of residents who may be interested in accepting ditched material as fill