Site work, paving and outdoor lighting for a mixed-use development in Nightmute, Alaska. Completed plans call for site work for a transportation facility; for paving for a transportation facility; and for outdoor lighting for a transportation facility.

Contract #: CFAPT00572 Federal Project #:3-02-0195-003-2024 IRIS Program #:CFAPT00572 Engineer's Estimate Range: Between $10,000,000 and $20,000,000 This federally funded project will rehabilitate the runway, taxiway, runway and taxiway safety areas, apron, and airport access road at the Nightmute Airport in Nightmute, Alaska. Improvements will also include expanding the runway safety area; reconstructing the runway and taxiway lighting systems; installing a new rotating beacon on a tip-down pole; improvements to the electrical equipment building; installing new lighted primary and supplemental wind cones; re-leveling a snow removal equipment building; drainage improvements; and construction of a riprap revetment and permanent barge landing. Location of Project: Nightmute, Alaska Contracting Officer: Sean L. Holland, P.E., Regional Director To be responsive, a bid must include a bid guaranty equal to 5% of the amount bid, The apparent successful bidder must furnish a payment bond in the amount of 100% of the contract and a performance bond in the amount of 100% of the contract as security conditioned for the full, complete and faithful performance of the contract All work shall be completed by September 30, 2026. A bidder requesting assistance in viewing the project site must make arrangements at least 48 hours in advance. The point of contract for inquiries for this project is Philip Cheasebro, P.E. Email: philip.cheasebro@alaska.gov Phone: (907) 269-0606 A bidder may direct questions concerning bidding procedures and requirements to: Sharon L. Smith, P.E. Chief of Contracts P.O. Box 196900 Anchorage, AK 99519-6900 Email: sharon.smith@alaska.gov Phone: (907) 269-0414 AKDOT - Nightmute Airport Improvements *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.