Site work and paving for a road / highway in New Roads, Louisiana. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Specbook: 2016 Milling asphalt concrete, pavement patching, asphalt concrete overlay, and related work. Question Deadline 06/20/2024 Questions submitted within a period of 96 hours prior to the advertised time for the opening of bids, excluding Saturdays, Sundays, and any other legal holidays, may not be answered prior to bidding. Parish(es): West Feliciana Route(s): LA 10 Federal Number: H015559 Estimated Construction Cost: $1,000,000 to $2,500,000 LADOT - LA 10: US 61 - 1.3 MI E US 61 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Furnish and place Class II base course on a prepared surface in accordance with these specifications, in conformity with the lines, grades, thickness, and typical sections shown on the plans or established by the engineer. Control the selection, placement, mixing and compaction of materials so that the completed base course is uniform and conforms to plan dimensions and other acceptance requirements. Quality assurance requirements shall be as specified in the latest edition of the Departments publication titled Application of Quality Assurance Specifications for Embankment and Base Course. Unless approved otherwise in writing, use the same base course material throughout the project in accordance with these specifications. Immediately prior to application of base course on existing pavement, remove raised pavement markers at no direct pay. When asphalt concrete or portland cement concrete is specified on the plans, the total thickness of asphalt concrete or portland cement concrete shall be the thickness as indicated on the plans. When the base course material is not specified on the plans, any of the following types may be used: 1. Soil Cement 2. Crushed Stone 3. Asphalt Concrete on Embankment Layer 4. Recycled Portland Cement Concrete 5. Blended Calcium Sulfate For Asphalt Concrete on Embankment Layer, the top half of the base course thickness shall be asphalt concrete. The remaining thickness of the base shall be the same type and construction as the top layer of the underlying embankment, treated layer, or subgrade, or in accordance with Section 203 for placement on existing ground. Do not place raw, untreated material between a treated layer and the asphalt concrete layer