Renovation of a municipal facility in Saint Charles, Missouri. Completed plans call for the renovation of a municipal facility.

**As of December 4, 2023, This project has not yet been awarded. A timeline for award has not yet been established.** A. Provide seismic restraints as indicated for each type of equipment and for piping systems. This section applies to Fire Protection Systems. B. Scope of work Flexible pipe connectors are specified in the appropriate piping section of these specifications Seismic control manufacturer shall have the following responsibilities Determine seismic restraint sizes and locations Provide piping and equipment seismic restraints as scheduled or specified. Provide installation instructions and drawings Provide calculations to determine restraint loads resulting from seismic forces in accordance with the Local Building Code (see below), governing codes, and project seismic requirements. Seismic calculations shall be certified by a licensed engineer, experienced in the design of restraints for flexibly mounted equipment. 3. Friction from gravity loads shall not be considered resistance to seismic forces 4. All piping shall to be restrained per NFPA 13. At a minimum, the seismic restraint manufacturer shall provide documentation on maximum restraint spacing for various cable sizes and anchors, as well as 'worst case' reaction loads at restraint locations. The scope of the work is described in the Bid Specifications and Contract Documents, including without limitation the Bid Form, which are incorporated herein by this reference. Administration Building Data Center UPS Upgrade Bid All questions must be received no later than 2:00 PM on 10/13/2023. St. Charles County has the right to accept and/or reject any and all bids.