Site work and paving for a mixed-use development in Franklin, Massachusetts. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; sidewalk / parking lot; and water / sewer project.

In accordance with MGL c. 30, 39M, it is the intention of the Town of Franklin to retain the services of a construction firm for the purposes of constructing approximately 7,250 feet of roadway improvements along Country Club Drive, Jordan Road, Tam-O-Shanter Road, and Burning Tree Road within the Town of Franklin. Bidders must be pre-qualified with MassDOT with the class of work as HIGHWAY - CONSTRUCTION for the amount of the Estimated Construction Cost indicated below. The work to be performed will include excavation, pavement reclamation, pavement milling, paving with hot mix asphalt, asphalt berm, granite curb, asphalt sidewalks, drainage improvements, and other incidental work as required. Work under this Contract shall be paid for at the contract unit bid prices, which shall constitute full compensation for all material, labor, equipment, etc., required to satisfactorily complete the work. Question Deadline 01/11/2024 at 10:00 AM ET Every request for such interpretation should be in writing addressed to Pam Vickery, Chief Procurement Officer, Municipal Building, 355 East Central St., Franklin, MA 02038 or to email address: (pvickery@franklinma.gov ) The work to be performed under this Contract includes, but is not limited to, providing all materials, equipment, labor, and supervision to construct the Roadway Improvements Project. The work includes the construction of roadway improvements on Country Club Drive, Jordan Road, Tam-OShanter Road, and Burning Tree Road in the Town of Franklin. Plans prepared by Town of Franklin Engineering Division. The location, general characteristics, and principal details of the Work are indicated on plans entitled: Town of Franklin, "COUNTRY CLUB DRIVE NEIGHBORHOOD ROADWAY IMPROVEMENTS" dated February 16, 2023 Franklin, MA. Additional drawings showing details in accordance with which the Work is to be done may be furnished by addendum from time to time during the bidding period by the Owner or its Engineer, and shall then become a part of the Contract Documents The Contractor shall furnish all labor, services, materials, equipment, plant, machinery, apparatus, appliances, tools, supplies, and all other things necessary to do all work required for the completion of each item of the Work and as herein specified. The Work to be done and paid for under any item shall not be limited to the exact extent mentioned or described but shall include all incidental work necessary or customarily done for the completion of that item