Renovation of a transportation facility in Sacramento, California. Completed plans call for the renovation of a transportation facility.

The Project includes, without limitation, furnishing all necessary labor, materials, equipment and other incidental and appurtenant Work necessary to satisfactorily complete the Project, as more specifically described in specifications. This Work will be performed in strict conformance with the specifications, permits from regulatory agencies with jurisdiction, and applicable regulations. The quantity of Work to be performed and materials to be furnished are approximations only, being given as a basis for the comparison of Bids. Actual quantities of Work to be performed may vary at the discretion of the County. This job is to re-roof building 1251A at Sacramento International Airport . ESTIMATED CONSTRUCTION COST: $143,000 CONTRACTOR LICENSE REQUIRED: Roofing Contractor, C-39 Direct pre-bid questions to the Project Manager, David Delemos, via the Q&A tab in the portal. ALL PRE-BID QUESTIONS MUST BE SUBMITTED IN WRITING NO LATER THAN Thursday, February 29, 2024 BY 2:00 pm. Questions received after that time will not be answered. Responses will be by addenda to the bid documents. The County of Sacramento reserves the right to reject any or all bids, to waive any informality in any bid, and to determine which bid, in their judgment, is the lowest responsive bid of a responsible Bidder. Each bid must also be accompanied by security in the form of a bid bond issued by a corporate surety, a certified check or cashier's check payable to the Treasurer of Sacramento County, or cash for an amount not less than ten percent (10%) of the aggregate sum of the bid. The successful bidder shall be required to execute a material and labor Payment Bond and Performance Bond, issued by a corporate surety, acceptable to the County of Sacramento, each for not less than one hundred percent (100%) of the contract price. The main roof deck directly under the insulation is metal, not concrete. Adhere the base layer of insulation to the primed metal deck with the same bead spacing as it would be over concrete. 2. Change the tapered insulation to 1/8": 12" from 1/4":12". Keep the crickets at 1/2":12". 3. The core informaOon on the small building is as follows: a. Wood deck. b. 1.5" wood fiberboard. c. 3-ply BUR with gravel surfacing. 4. The roof installation on the small building shall be as follows: a. 1" polyisocyanurate, mechanically atached. b. 1/2" Dens Deck Prime, fully-adhered. c. 60 mil Tremply KEE FB fully-adhered per the specification. 5. The lighting arrest system is to be removed and re-affixed in the same manner it was affixed. No modifications are to be made to the system. Question Submission Deadline: March 1, 2024, 2:00pm