Site work and paving for a road / highway in Fox Lake, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The owner reserves the right to reject any or all bids. Contractor must have an onsite pre-job meeting with a representative of the Town in prior to award. A letting of the work described herein is subject to the provisions of Section 66.293 Wisconsin Statutes and the law and ordinances of the Town of Fox Lake of Dod ge County relating to wage rates payable on the work. There is a completion deadline for all projects of August 31, 2024 Project 1 Dykstra Road (CTH F to Blanecae Rd). Approx. .84 miles Project 2 Minnema Road (Canada Island Rd to Termini). Approx. .51 miles Project 3 Rainbow Ter (CTH A to CTH A. Approx. .35 miles Project 1, 2 and 3 will be pulverizing full depth of existing asphalt, fine grade and pave a hot mix asphalt 2-inch compacted mat and 1.5-foot shoulder. Price to include paving into driveways approximately 5 ft to match. Double Hot Oil Chip Seal over a Hard Surface Contractor to supply all labor, material and equipment to sign work zone. Immediately before applying the liquid asphalt, clean the existing surface with a power broom to remove dirt, clay or other debris. PG 58-28 5% Cut Back Liquid Asphalt blended at a State of Wisconsin and ASSHTO certified liquid asphalt production facility: furnished, heated to 350 degrees F and appliedin a single pass up to 24 feet wide. First, or bottom, layer must be rolled/compacted prior to top layer being applied. Contractor must state type and size of aggerate to be used. Contractor must also estimate any paver laid asphalt patching that is needed. Give the tons of asphalt and price. Projects 1, 2, 4, 8, 9 & 11 require sweeping/vacuuming of loose aggregate at a time after completing that is agreed upon by the Town Board. Contract must bid all scope of work. 2024 Single/Double Chip Seal