The Springtree Wastewater Treatment Plant (WWTP) has a solids handling area with odor control system which was constructed in 1997 and is at the end of the useful life. The system is showing corrosion and the vessel is directly exposed to sunlight resulting in deterioration. Additionally, there are two process areas that need valve and actuator replacement within the same plant. The treated effluent at the plant is stored in the equalization tank. Motorized valves that control the flow going in and coming out are old and non-functional and need immediate replacement. The plant return activated sludge pump station valves and influent pump header are non-functioning. Replacement of these will require line stop and construction staging. The wastewater treatment plant has chlorine contact basins which have coatings that are currently worn out. Specialty coatings are needed to be specified by engineer along with sequencing for isolation and staging during construction. This project will benefit the environment by increasing the performance, improving the air quality at the WWTP and saving energy by lowering the amount of sludge pumping to lift station and wasterwater plant .This project is recommended in the 2019 Water and Wastewater Master Plan. The project is include in the city's 2024-2028 Capital Improvement Program (CIP) *Project information has been obtained through a public capital improvement plan (CIP). A CIP is a financial schedule for short- and long-range projects which is updated regularly. Information listed in the CIP often evolves based on funding availability and the project details, including timeline and value, are subject to change. The content management team will continue to pursue additional details as they become available.
.webp)
